[PATCH V1 8/9] clk: sprd: add clocks support for SC9860
Chunyan Zhang
zhang.lyra at gmail.com
Thu Jun 22 03:21:06 PDT 2017
Hi Stephen,
On 20 June 2017 at 09:41, Stephen Boyd <sboyd at codeaurora.org> wrote:
> On 06/18, Chunyan Zhang wrote:
>> diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
>> index c593a93..0d90b40 100644
>> --- a/drivers/clk/sprd/Makefile
>> +++ b/drivers/clk/sprd/Makefile
>> @@ -1,3 +1,4 @@
>> ifneq ($(CONFIG_OF),)
>> obj-y += ccu_common.o ccu_gate.o ccu_mux.o ccu_div.o ccu_composite.o ccu_pll.o
>> +obj-y += ccu-sc9860.o
>
> And a Kconfig for this SoC specific driver.
Ok.
>
>> endif
>> diff --git a/drivers/clk/sprd/ccu-sc9860.c b/drivers/clk/sprd/ccu-sc9860.c
>> new file mode 100644
>> index 0000000..6cd4dc5
>> --- /dev/null
>> +++ b/drivers/clk/sprd/ccu-sc9860.c
>> +
>> +static CLK_FIXED_FACTOR(fac_4m, "fac-4m", "ext-26m",
>> + 6, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_2m, "fac-2m", "ext-26m",
>> + 13, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_1m, "fac-1m", "ext-26m",
>> + 26, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_250k, "fac-250k", "ext-26m",
>> + 104, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_rpll0_26m, "rpll0-26m", "ext-26m",
>> + 1, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_rpll1_26m, "rpll1-26m", "ext-26m",
>> + 1, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_rco_25m, "rco-25m", "ext-rc0-100m",
>> + 4, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_rco_4m, "rco-4m", "ext-rc0-100m",
>> + 25, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_rco_2m, "rco-2m", "ext-rc0-100m",
>> + 50, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_3k2, "fac-3k2", "ext-32k",
>> + 10, 1, CLK_IS_BASIC);
>> +static CLK_FIXED_FACTOR(fac_1k, "fac-1k", "ext-32k",
>> + 32, 1, CLK_IS_BASIC);
>> +
>> +#define SC9860_GATE_FLAGS (CLK_IGNORE_UNUSED | CLK_IS_BASIC)
>
> No CLK_IS_BASIC. Why is everything marked as CLK_IGNORE_UNUSED?
Copied from the original implementation :)
But I will do a double check, there'are indeed some clocks which
shouldn't be marked as CLK_IGNORE_UNUSED.
>
>> +static SPRD_CCU_GATE(rpll0_gate, "rpll0-gate", "ext-26m", 0x402b016c,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(rpll1_gate, "rpll1-gate", "ext-26m", 0x402b016c,
>> + 0x1000, BIT(18), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(mpll0_gate, "mpll0-gate", "ext-26m", 0x402b00b0,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(mpll1_gate, "mpll1-gate", "ext-26m", 0x402b00b0,
>> + 0x1000, BIT(18), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(dpll0_gate, "dpll0-gate", "ext-26m", 0x402b00b4,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(dpll1_gate, "dpll1-gate", "ext-26m", 0x402b00b4,
>> + 0x1000, BIT(18), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(gpll_gate, "gpll-gate", "ext-26m", 0x402b032c,
>> + 0x1000, BIT(0), SC9860_GATE_FLAGS,
>> + CLK_GATE_SET_TO_DISABLE);
>> +static SPRD_CCU_GATE(cppll_gate, "cppll-gate", "ext-26m", 0x402b02b4,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(ltepll0_gate, "ltepll0-gate", "ext-26m", 0x402b00b8,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(ltepll1_gate, "ltepll1-gate", "ext-26m", 0x402b010c,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE(twpll_gate, "twpll-gate", "ext-26m", 0x402b00bc,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio0_2x_en, "sdio0-2x-en", 0x402e013c,
>> + 0x1000, BIT(2), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio0_1x_en, "sdio0-1x-en", 0x402e013c,
>> + 0x1000, BIT(3), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio1_2x_en, "sdio1-2x-en", 0x402e013c,
>> + 0x1000, BIT(4), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio1_1x_en, "sdio1-1x-en", 0x402e013c,
>> + 0x1000, BIT(5), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio2_2x_en, "sdio2-2x-en", 0x402e013c,
>> + 0x1000, BIT(6), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(sdio2_1x_en, "sdio2-1x-en", 0x402e013c,
>> + 0x1000, BIT(7), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(emmc_1x_en, "emmc-1x-en", 0x402e013c,
>> + 0x1000, BIT(8), SC9860_GATE_FLAGS, 0);
>> +static SPRD_CCU_GATE_NO_PARENT(emmc_2x_en, "emmc-2x-en", 0x402e013c,
>> + 0x1000, BIT(9), SC9860_GATE_FLAGS, 0);
>> +
>> +/* GPLL/LPLL/DPLL/RPLL/CPLL */
>> +static const u64 const itable1[4] = {3, 780000000, 988000000, 1196000000};
>> +
>> +/* TWPLL/MPLL0/MPLL1 */
>> +static const u64 itable2[4] = {3, 1638000000, 2080000000, 2600000000UL};
>> +
>> +static const struct ccu_bit_field const f_rpll[PLL_FACT_MAX] = {
>> + { .shift = 0, .width = 1 }, /* lock_done */
>> + { .shift = 3, .width = 1 }, /* div_s */
>> + { .shift = 80, .width = 1 }, /* mod_en */
>
> Are they even shifts? Or offsets from some base? I have to go
> back and read the other patch.
You must've noticed that each PLL has a structure of "ccu_bit_field
*factors", each pair of shift - width represents a bit field in
registers, each bit field stores a factor used to calculate PLL clock
rate, but different PLL clock has different bit fields arrangement due
to hardware design.
>
>> + { .shift = 81, .width = 1 }, /* sdm_en */
>> + { .shift = 0, .width = 0 }, /* refin */
>> + { .shift = 14, .width = 2 }, /* ibias */
>> + { .shift = 16, .width = 7 }, /* n */
>> + { .shift = 4, .width = 7 }, /* nint */
>> + { .shift = 32, .width = 23}, /* kint */
>> + { .shift = 0, .width = 0 }, /* prediv */
>> + { .shift = 0, .width = 0 }, /* postdiv */
>> +};
>> +static const u32 const regs_rpll0[4] = { 3, 0x44, 0x48, 0x4c };
>> +static SPRD_CCU_PLL_WITH_ITABLE(rpll0_clk, "rpll0", "rpll0-gate", 0x40400044,
>> + regs_rpll0, itable1, 200, f_rpll);
>> +
>> +static const u32 const regs_rpll1[4] = { 3, 0x50, 0x54, 0x58 };
>> +static SPRD_CCU_PLL_WITH_ITABLE(rpll1_clk, "rpll1", "rpll1-gate", 0x40400050,
>> + regs_rpll1, itable1, 200, f_rpll);
>> +
>> +static const struct ccu_bit_field const f_mpll0[PLL_FACT_MAX] = {
> [...]
>> diff --git a/include/dt-bindings/clock/sc9860-ccu.h b/include/dt-bindings/clock/sc9860-ccu.h
>> new file mode 100644
>> index 0000000..dd7ccf9
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/sc9860-ccu.h
>> @@ -0,0 +1,19 @@
>> +/*
>> + * Spreadtrum SC9860 platform clocks
>> + *
>> + * Copyright (C) 2017, Spreadtrum Communications Inc.
>> + *
>> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_SC9860_CCU_H_
>> +#define _DT_BINDINGS_CLK_SC9860_CCU_H_
>> +
>> +#define CLK_FAC_1M 2
>> +#define CLK_EMMC_2X_EN 29
>> +#define CLK_L0_409M6 60
>> +#define CLK_EMMC_2X 88
>> +#define CLK_EMMC_EB 158
>
> Why are only a handful exposed in the header file? Not exposing
> everything is mostly a maintenance nightmare right now.
No special reason here, my thought simply was that there's no much
Spreadtrum's device driver in mainline at present, so most of the
clocks wouldn't be needed for now, I planned to expose only those when
the device driver they provide clock to, that's saying when we add a
new device driver we'll expose the clocks this device needs.
Another reason is, I'm not sure if there are still some clocks I
haven't listed for SC9860 , so if we need to add a clock in the
feature, the value of these macros defined in
"include/dt-bindings/clock/sc9860-ccu.h" may be changed, that means I
need to change the index of all clocks following the clock inserted
into.
But why will not exposing everything bring trouble to maintenance? :)
Thank you for your review,
Chunyan
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list