[PATCH v2 1/3] input: sun4i-a10-lradc-keys: Add support for A83T

[Ziping Chen]

2017-06-22 4:35 GMT+08:00 Maxime Ripard <maxime.ripard at free-electrons.com>:
> On Tue, Jun 20, 2017 at 09:44:43PM +0800, Ziping Chen wrote:
>> From: Ziping Chen <techping.chan at gmail.com>
>>
>> Allwinner A83T SoC has a low res adc like the one
>> in Allwinner A10 SoC, however, the A10 SoC's vref
>> of lradc internally is divided by 2/3 and the A83T
>> SoC's isn't, thus add a hardware variant for it to
>> be compatible with various devices.
>
> Where did you get that info from?
>
> Judging from the user manual, the threshold is actually set to 3/4,
> and not 2/3, but there's still one.


In the top of page 266 of the A10 User Manual V1.50, it said "2/3
ADC_REF (Level A)" which mean Level A is 2/3 of the vref.

In the bottom of page 230 of the A83T User Manual V1.5.1, it said
"1.35V (Level A)" meaning that Level A is 1.35V. Oh, it's my fault...
It's 3/4 of the vref (A83T's ADC_REF is fixed at 1.8V).

So... i will change r_lradc_variant_a83t.divisor_numerator to 3 and
r_lradc_variant_a83t.divisor_denominator to 4...

Is there any other problems?

Thanks,
Ziping

>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com