[PATCH v2 2/2] soc: brcmstb: Add driver for DPFE

[Florian Fainelli]

On 06/21/2017 02:00 PM, Florian Fainelli wrote:
> On 06/14/2017 02:32 PM, Florian Fainelli wrote:
>> On 06/14/2017 09:34 AM, Markus Mayer wrote:
>>> On 13 June 2017 at 17:03, Florian Fainelli <f.fainelli at gmail.com> wrote:
>>>> Hi Markus,
>>>>
>>>> On 06/13/2017 03:37 PM, Markus Mayer wrote:
>>>>> From: Markus Mayer <mmayer at broadcom.com>
>>>>>
>>>>> This driver allows access to DRAM properties, such as the refresh rate,
>>>>> via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be
>>>>> used as indirect indicator of the DRAM temperature.
>>>>>
>>>>> The driver also allows setting of the sampling interval.
>>>>>
>>>>> Signed-off-by: Markus Mayer <mmayer at broadcom.com>
>>>>> ---
>>>>>  MAINTAINERS                      |   8 +
>>>>>  drivers/soc/bcm/brcmstb/Makefile |   2 +-
>>>>>  drivers/soc/bcm/brcmstb/dpfe.c   | 689 +++++++++++++++++++++++++++++++++++++++
>>>>>  3 files changed, 698 insertions(+), 1 deletion(-)
>>>>>  create mode 100644 drivers/soc/bcm/brcmstb/dpfe.c
>>>>>
>>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>>> index f7d568b..04f0be6 100644
>>>>> --- a/MAINTAINERS
>>>>> +++ b/MAINTAINERS
>>>>> @@ -2864,6 +2864,14 @@ S:     Maintained
>>>>>  F:   Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
>>>>>  F:   drivers/cpufreq/brcmstb*
>>>>>
>>>>> +BROADCOM STB SOC DPFE DRIVER
>>>>> +M:   Markus Mayer <mmayer at broadcom.com>
>>>>> +M:   bcm-kernel-feedback-list at broadcom.com
>>>>> +L:   linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
>>>>> +S:   Maintained
>>>>> +F:   Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt
>>>>> +F:   drivers/misc/brcmstb-dpfe.c
>>>>
>>>> Just one nit: this should be drivers/soc/bcm/brcmstb/dpfe.c, other than
>>>> that, I just need an Ack from Rob on the binding, and I will queue this
>>>> up, thanks!
>>>
>>> Oops. Thanks for catching that. Would you like me to re-send or will
>>> you fix up that path on your end?
>>
>> I can fix it up if Rob is happy with the current binding, if you need to
>> resubmit, please fix that as well. Thanks!
> 
> Can you respin a v2 with the MAINTAINERS file as well as the downstream
> kernel fixes that implement suspend/resume support?

Never mind, I grepped for the wrong thing, applied
-- 
Florian