[PATCH v5 0/6] Add support for the ICU unit in Marvell Armada 7K/8K

Gregory CLEMENT gregory.clement at free-electrons.com
Wed Jun 21 08:50:20 PDT 2017


Hi Marc,
 
 On mer., juin 21 2017, Marc Zyngier <marc.zyngier at arm.com> wrote:

> On 21/06/17 16:42, Gregory CLEMENT wrote:
>> Hi Marc and Thomas,
>>  
>>  On mer., juin 21 2017, Thomas Petazzoni <thomas.petazzoni at free-electrons.com> wrote:
>> 
>>> Hello,
>>>
>>> On Wed, 21 Jun 2017 16:14:21 +0100, Marc Zyngier wrote:
>>>
>>>>> Thomas Petazzoni (6):
>>>>>   dt-bindings: interrupt-controller: add DT binding for the Marvell GICP
>>>>>   dt-bindings: interrupt-controller: add DT binding for the Marvell ICU
>>>>>   irqchip: irq-mvebu-gicp: new driver for Marvell GICP
>>>>>   irqchip: irq-mvebu-icu: new driver for Marvell ICU
>>>>>   arm64: marvell: enable ICU and GICP drivers
>>>>>   arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
>>>>>
>>>>>  .../bindings/interrupt-controller/marvell,gicp.txt |  27 ++
>>>>>  .../bindings/interrupt-controller/marvell,icu.txt  |  51 ++++
>>>>>  arch/arm64/Kconfig.platforms                       |   2 +
>>>>>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      |   7 +
>>>>>  .../boot/dts/marvell/armada-cp110-master.dtsi      |  59 +++--
>>>>>  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi |  55 ++--
>>>>>  drivers/irqchip/Kconfig                            |   6 +
>>>>>  drivers/irqchip/Makefile                           |   2 +
>>>>>  drivers/irqchip/irq-mvebu-gicp.c                   | 279 ++++++++++++++++++++
>>>>>  drivers/irqchip/irq-mvebu-gicp.h                   |  12 +
>>>>>  drivers/irqchip/irq-mvebu-icu.c                    | 289 +++++++++++++++++++++
>>>>>  .../dt-bindings/interrupt-controller/mvebu-icu.h   |  15 ++
>>>>>  12 files changed, 756 insertions(+), 48 deletions(-)
>>>>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
>>>>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
>>>>>  create mode 100644 drivers/irqchip/irq-mvebu-gicp.c
>>>>>  create mode 100644 drivers/irqchip/irq-mvebu-gicp.h
>>>>>  create mode 100644 drivers/irqchip/irq-mvebu-icu.c
>>>>>  create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h
>>>>>   
>>>>
>>>> It all looks good to me. How do we merge this? I take the first five
>>>> patches and Gregory takes the last one?
>>>
>>> I think you should take the first four patches, and Grégory takes the
>>> last two ones. But I'll let Grégory confirm.
>> 
>> Indeed it makes more sens to merge the patch 4 through the arm-soc
>> subsystem.
>
> Hmmm. You mean patches 5 and 6, right? And I queue 1 to 4?

Yes that was what I meant!

(it's too hot here and my brain is melting...)

Thanks,

Gregory

>
> Thanks,
>
> 	M.
> -- 
> Jazz is not dead. It just smells funny...

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list