[PATCH v2 5/8] dt-bindings: iio: Add STM32 LPTimer trigger binding

[Fabrice Gasnier]

Add documentation for STMicroelectronics STM32 Low-Power Timer Trigger
binding.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
---
Changes in v2:
- s/Low Power/Low-Power
- remove leading 0x in example (parent node)
- improve reg property description
---
 .../bindings/iio/timer/stm32-lptimer-trigger.txt   | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt

diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
new file mode 100644
index 0000000..466d99f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
@@ -0,0 +1,23 @@
+STMicroelectronics STM32 Low-Power Timer Trigger
+
+STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
+by STM32 internal ADC and/or DAC.
+
+Must be a sub-node of an STM32 Low-Power Timer device tree node.
+See ../mfd/stm32-lptimer.txt for details about the parent node.
+
+Required properties:
+- compatible:		Must be "st,stm32-lptimer-trigger".
+- reg:			Selects trigger hardware block. Must be 0, 1 or 2
+			respectively for lptimer1, lptimer2 or lptimer3
+			trigger output.
+
+Example:
+	lptimer1: lptimer at 40002400 {
+		compatible = "st,stm32-lptimer";
+		...
+		trigger at 0 {
+			compatible = "st,stm32-lptimer-trigger";
+			reg = <0>;
+		};
+	};
-- 
1.9.1