[PATCH] arm64: dts: marvell: use new bindings for xor clocks on ap806

Antoine Tenart antoine.tenart at free-electrons.com
Mon Jun 19 23:38:38 PDT 2017


New bindings are used for the system controller on the ap806, which
means all clock properties must be converted. Use the new bindings in
the xor nodes.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index ff1964d314de..02e5aff48c81 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -159,7 +159,7 @@
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -168,7 +168,7 @@
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -177,7 +177,7 @@
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
@@ -186,7 +186,7 @@
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
 				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_syscon 3>;
+				clocks = <&ap_clk 3>;
 				dma-coherent;
 			};
 
-- 
2.9.4




More information about the linux-arm-kernel mailing list