[PATCH 2/2] RFC: ARM: dts: imx7d-sdb: swap pad settings for USDHCx 50Mhz and 100Mhz

Shawn Guo shawnguo at kernel.org
Wed Jun 14 20:39:36 PDT 2017


On Wed, Jun 07, 2017 at 10:45:42AM -0700, Troy Kisky wrote:
> It does not make sense that 100 Mhz pad settings would use a x2
> setting and 50 Mhz would use a x4 setting, so swap.
> 
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>

Add Dong and Frank for this one as well.

Shawn

> ---
>  arch/arm/boot/dts/imx7d-sdb.dts | 72 ++++++++++++++++++++---------------------
>  1 file changed, 36 insertions(+), 36 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index cab9208..70dcbf4 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -590,31 +590,20 @@
>  
>  		pinctrl_usdhc1: usdhc1grp {
>  			fsl,pins = <
> -				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
> -				MX7D_PAD_SD1_CLK__SD1_CLK		0x09
> -				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
> -				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
> -				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
> -				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
> -				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
> -				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
> -				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
> +				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
> +				MX7D_PAD_SD1_CLK__SD1_CLK		0x0a
> +				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
> +				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
> +				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
> +				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
> +				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x5a /* CD */
> +				MX7D_PAD_SD1_WP__GPIO5_IO1		0x5a /* WP */
> +				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x5a /* vmmc */
>  			>;
>  		};
>  
>  		pinctrl_usdhc2: usdhc2grp {
>  			fsl,pins = <
> -				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
> -				MX7D_PAD_SD2_CLK__SD2_CLK		0x09
> -				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
> -				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
> -				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
> -				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
> -			>;
> -		};
> -
> -		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
> -			fsl,pins = <
>  				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
>  				MX7D_PAD_SD2_CLK__SD2_CLK		0x0a
>  				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
> @@ -624,6 +613,17 @@
>  			>;
>  		};
>  
> +		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
> +			fsl,pins = <
> +				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
> +				MX7D_PAD_SD2_CLK__SD2_CLK		0x09
> +				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
> +				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
> +				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
> +				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
> +			>;
> +		};
> +
>  		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
>  			fsl,pins = <
>  				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
> @@ -638,22 +638,6 @@
>  
>  		pinctrl_usdhc3: usdhc3grp {
>  			fsl,pins = <
> -				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
> -				MX7D_PAD_SD3_CLK__SD3_CLK		0x09
> -				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
> -				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
> -				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
> -				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
> -				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
> -				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
> -				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
> -				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
> -				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
> -			>;
> -		};
> -
> -		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> -			fsl,pins = <
>  				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
>  				MX7D_PAD_SD3_CLK__SD3_CLK		0x0a
>  				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
> @@ -668,6 +652,22 @@
>  			>;
>  		};
>  
> +		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> +			fsl,pins = <
> +				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
> +				MX7D_PAD_SD3_CLK__SD3_CLK		0x09
> +				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
> +				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
> +				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
> +				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
> +				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
> +				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
> +				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
> +				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
> +				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
> +			>;
> +		};
> +
>  		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
>  			fsl,pins = <
>  				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list