[PATCH 00/11] ARM: dts: imx6qdl: video capture support

[Steve Longerbeam]

On 06/14/2017 08:09 AM, Shawn Guo wrote:
> On Mon, Jun 12, 2017 at 11:23:53AM -0700, Steve Longerbeam wrote:
>> This series defines the i.MX6 internal video multiplexers and MIPI CSI-2
>> receiver device nodes, and their connections to eachother and the i.MX6
>> IPU CSI ports.
>>
>> It also implements video capture support on the SabreLite, SabreSD, and
>> SabreAuto reference platforms, by defining the video sensor nodes on those
>> platforms, and their connections to the video muxes and MIPI CSI-2 receiver.
>>
>> There should not be much of anything controversial in this series. The
>> imx-media driver is set to be merged in time for 4.13, so please accept
>> this series soon.
>>
>>
>> Philipp Zabel (2):
>>    ARM: dts: imx6qdl: add multiplexer controls
>>    ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their
>>      connections
>>
>> Steve Longerbeam (9):
>>    ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
>>    ARM: dts: imx6qdl: add capture-subsystem device
>>    ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
>>    ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
>>    ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
>>    ARM: dts: imx6-sabreauto: create i2cmux for i2c3
>>    ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
>>    ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
>>    ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
> 
> Applied all, thanks.
> 

Thanks Shawn!

Steve