[PATCH v4 11/11] arm64: marvell: dts: add xmdio nodes for 7k/8k
Antoine Tenart
antoine.tenart at free-electrons.com
Wed Jun 14 08:49:11 PDT 2017
Add the description of the xMDIO bus for the Marvell Armada 7k and
Marvell Armada 8k; for both CP110 slave and master. This bus is found
on Marvell Ethernet controllers and provides an interface with the
xMDIO bus.
Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 8 ++++++++
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 576e825585c9..8b512b75aea9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -97,6 +97,14 @@
clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
};
+ cpm_xmdio: mdio at 12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
cpm_syscon0: system-controller at 440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 797208a11f9d..bd0c0e03edd2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -104,6 +104,14 @@
clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
};
+ cps_xmdio: mdio at 12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
cps_syscon0: system-controller at 440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
--
2.9.4
More information about the linux-arm-kernel
mailing list