[PATCH v7 3/3] PCI: Add tango MSI controller support

[Marc Zyngier]

On 14/06/17 10:19, Marc Gonzalez wrote:
> On 14/06/2017 11:00, Marc Gonzalez wrote:
> 
>> The MSI controller in Tango supports 256 message-signaled interrupts,
>> and a single doorbell address.
>>
>> Signed-off-by: Marc Gonzalez <marc_gonzalez at sigmadesigns.com>
>> ---
>> Changes from v6 to v7
>> o Call spin_lock() not spin_lock_irqsave() in the ISR
>> ---
>>  drivers/pci/host/pcie-tango.c | 225 ++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 225 insertions(+)
> 
> Someone on IRC suggested testing the driver with LOCKDEP.
> 
> If I understand the warning below correctly, I am not supposed
> to call irq_domain_set_info() while holding used_msi_lock?

Indeed. This creates an AB/BA situation, which will eventually deadlock.
Once again, lockdep saves the day.

> NB: in probe, my driver calls
> 
> 	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> 
> This should not break LOCKDEP analysis, right?

It doesn't. The code is provably wrong, and lockdep proved that it is wrong.

	M.
-- 
Jazz is not dead. It just smells funny...