[PATCH 2/2] arm64: dts: marvell: disable the mdio nodes by default
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Jun 13 01:41:17 PDT 2017
Hi Antoine,
On jeu., juin 08 2017, Antoine Tenart <antoine.tenart at free-electrons.com> wrote:
> Disable the mdio nodes by default in the cp110 slave and master dtsi as
> they're not wired on every board.
>
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 1 +
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index ac8df5201cd6..5defde123f35 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -94,6 +94,7 @@
> #size-cells = <0>;
> compatible = "marvell,orion-mdio";
> reg = <0x12a200 0x10>;
> + status = "disabled";
> };
>
> cpm_syscon0: system-controller at 440000 {
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 7740a75a8230..649a7b55fee4 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -101,6 +101,7 @@
> #size-cells = <0>;
> compatible = "marvell,orion-mdio";
> reg = <0x12a200 0x10>;
> + status = "disabled";
> };
>
> cps_syscon0: system-controller at 440000 {
> --
> 2.9.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list