[PATCH v2 1/1] PCI: imx6: Add pcie compliance test option

[Schöfegger Stefan]

On Tuesday, June 13, 2017 2:00:16 AM CEST Richard Zhu wrote:
> > -----Original Message-----
> > From: Bjorn Helgaas [mailto:helgaas at kernel.org]
> > Sent: Tuesday, June 13, 2017 7:49 AM
> > To: Stefan Schoefegger <stefan.schoefegger at ginzinger.com>
> > Cc: linux-pci at vger.kernel.org; Richard Zhu <hongxing.zhu at nxp.com>; Arnd
> > Bergmann <arnd at arndb.de>; open list <linux-kernel at vger.kernel.org>;
> > Kishon Vijay Abraham I <kishon at ti.com>; Jingoo Han
> > <jingoohan1 at gmail.com>; Bjorn Helgaas <bhelgaas at google.com>;
> > moderated list:PCI DRIVER FOR IMX6 <linux-arm-kernel at lists.infradead.org>;
> > Lucas Stach <l.stach at pengutronix.de>
> > Subject: Re: [PATCH v2 1/1] PCI: imx6: Add pcie compliance test option
> > 
> > On Wed, Jun 07, 2017 at 01:36:11PM +0200, Stefan Schoefegger wrote:
> > > Link speed must not be limited to gen1 during link test for compliance
> > > tests
> > > 
> > > Signed-off-by: Stefan Schoefegger <stefan.schoefegger at ginzinger.com>
> > > ---
> > > 
> > > Changes since v1:
> > >  - pci-imx6.c moved to dwc directory
> > >  
> > >  drivers/pci/dwc/Kconfig    | 10 ++++++++++
> > >  drivers/pci/dwc/pci-imx6.c | 21 ++++++++++++---------
> > >  2 files changed, 22 insertions(+), 9 deletions(-)
> > > 
> > > diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index
> > > b7e15526d676..b6e9ced5a45d 100644
> > > --- a/drivers/pci/dwc/Kconfig
> > > +++ b/drivers/pci/dwc/Kconfig
> > > @@ -77,6 +77,16 @@ config PCI_IMX6
> > > 
> > >  	select PCIEPORTBUS
> > >  	select PCIE_DW_HOST
> > > 
> > > +config PCI_IMX6_COMPLIANCE_TEST
> > > +	bool "Enable pcie compliance tests on imx6"
> > > +	depends on PCI_IMX6
> > > +	default n
> > > +	help
> > > +	  Enables support for pcie compliance test on FSL iMX SoCs.
> > > +	  The link speed wouldn't be limited to gen1 when enabled.
> > > +	  Enable only during compliance tests, otherwise
> > > +	  link detection will fail on some peripherals.
> > 
> > I'm puzzled about why we would want to merge this patch.  It looks like
> > we're trying to game the system to make the device pass compliance testing
> > when it isn't really compliant.  Is this config option useful to users, or
> > is it only useful during internal development of iMX SoCs?
> 
> [Zhu hongxing] Agree with Bjorn. These modifications shouldn't be merged.
> They are used for the boards used to pass the PCIe RC certification, when
> one Standalone external OSC is used as PCIe reference clock source in the
> boards design.
Yes, passing gen2 compliance test is only possible with external clk. But this 
is a errata of imx6 pci phy of PCIe clk jitter. Why should we not be able to 
do gen2 tests? I think it is useful to do other gen2 tests (signal integrity) 
during board design.
> > >  config PCIE_SPEAR13XX
> > >  
> > >  	bool "STMicroelectronics SPEAr PCIe controller"
> > >  	depends on PCI
> > > 
> > > diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
> > > index 19a289b8cc94..b0fbe52e25b0 100644
> > > --- a/drivers/pci/dwc/pci-imx6.c
> > > +++ b/drivers/pci/dwc/pci-imx6.c
> > > @@ -533,15 +533,18 @@ static int imx6_pcie_establish_link(struct
> > 
> > imx6_pcie *imx6_pcie)
> > 
> > >  	u32 tmp;
> > >  	int ret;
> > > 
> > > -	/*
> > > -	 * Force Gen1 operation when starting the link.  In case the link is
> > > -	 * started in Gen2 mode, there is a possibility the devices on the
> > > -	 * bus will not be detected at all.  This happens with PCIe switches.
> > > -	 */
> > > -	tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
> > > -	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
> > > -	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
> > > -	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
> > > +	if (!IS_ENABLED(CONFIG_PCI_IMX6_COMPLIANCE_TEST)) {
> > > +		/*
> > > +		 * Force Gen1 operation when starting the link.  In case the
> > > +		 * link is started in Gen2 mode, there is a possibility the
> > > +		 * devices on the bus will not be detected at all.  This
> > > +		 * happens with PCIe switches.
> > > +		 */
> > > +		tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
> > > +		tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
> > > +		tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
> > > +		dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
> > > +	}
> > > 
> > >  	/* Start LTSSM. */
> > >  	if (imx6_pcie->variant == IMX7D)
> > > 
> > > --
> > > 2.11.0
> > > 
> > > 
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel at lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel