[PATCH v3 5/9] net: mvmdio: introduce an ops structure
Antoine Tenart
antoine.tenart at free-electrons.com
Mon Jun 12 02:57:41 PDT 2017
Introduce an ops structure to add an indirection on functions accessing
the registers. This is needed to add the xMDIO support later.
Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
drivers/net/ethernet/marvell/mvmdio.c | 71 ++++++++++++++++++++++++++---------
1 file changed, 53 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 2ed819d25305..7d2f1b2e1fe1 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -64,6 +64,14 @@ struct orion_mdio_dev {
wait_queue_head_t smi_busy_wait;
};
+struct orion_mdio_ops {
+ int (*is_done)(struct orion_mdio_dev *);
+ int (*is_read_valid)(struct orion_mdio_dev *);
+ void (*start_read)(struct orion_mdio_dev *, int, int);
+ u16 (*read)(struct orion_mdio_dev *);
+ void (*write)(struct orion_mdio_dev *, int, int, u16);
+};
+
static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
{
return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
@@ -74,9 +82,42 @@ static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
return readl(dev->regs) & MVMDIO_SMI_READ_VALID;
}
+static void orion_mdio_smi_start_read_op(struct orion_mdio_dev *dev, int mii_id,
+ int regnum)
+{
+ writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
+ (regnum << MVMDIO_SMI_PHY_REG_SHIFT) |
+ MVMDIO_SMI_READ_OPERATION),
+ dev->regs);
+}
+
+static u16 orion_mdio_smi_read_op(struct orion_mdio_dev *dev)
+{
+ return readl(dev->regs) & GENMASK(15, 0);
+}
+
+static void orion_mdio_smi_write_op(struct orion_mdio_dev *dev, int mii_id,
+ int regnum, u16 value)
+{
+ writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
+ (regnum << MVMDIO_SMI_PHY_REG_SHIFT) |
+ MVMDIO_SMI_WRITE_OPERATION |
+ (value << MVMDIO_SMI_DATA_SHIFT)),
+ dev->regs);
+}
+
+static const struct orion_mdio_ops orion_mdio_smi_ops = {
+ .is_done = orion_mdio_smi_is_done,
+ .is_read_valid = orion_mdio_smi_is_read_valid,
+ .start_read = orion_mdio_smi_start_read_op,
+ .read = orion_mdio_smi_read_op,
+ .write = orion_mdio_smi_write_op,
+};
+
/* Wait for the SMI unit to be ready for another operation
*/
-static int orion_mdio_wait_ready(struct mii_bus *bus)
+static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops,
+ struct mii_bus *bus)
{
struct orion_mdio_dev *dev = bus->priv;
unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT);
@@ -84,7 +125,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
int timedout = 0;
while (1) {
- if (orion_mdio_smi_is_done(dev))
+ if (ops->is_done(dev))
return 0;
else if (timedout)
break;
@@ -103,8 +144,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
if (timeout < 2)
timeout = 2;
wait_event_timeout(dev->smi_busy_wait,
- orion_mdio_smi_is_done(dev),
- timeout);
+ ops->is_done(dev), timeout);
++timedout;
}
@@ -118,30 +158,28 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
int regnum)
{
struct orion_mdio_dev *dev = bus->priv;
+ const struct orion_mdio_ops *ops = &orion_mdio_smi_ops;
int ret;
mutex_lock(&dev->lock);
- ret = orion_mdio_wait_ready(bus);
+ ret = orion_mdio_wait_ready(ops, bus);
if (ret < 0)
goto out;
- writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
- (regnum << MVMDIO_SMI_PHY_REG_SHIFT) |
- MVMDIO_SMI_READ_OPERATION),
- dev->regs);
+ ops->start_read(dev, mii_id, regnum);
- ret = orion_mdio_wait_ready(bus);
+ ret = orion_mdio_wait_ready(ops, bus);
if (ret < 0)
goto out;
- if (!orion_mdio_smi_is_read_valid(dev)) {
+ if (!ops->is_read_valid(dev)) {
dev_err(bus->parent, "SMI bus read not valid\n");
ret = -ENODEV;
goto out;
}
- ret = readl(dev->regs) & GENMASK(15, 0);
+ ret = ops->read(dev);
out:
mutex_unlock(&dev->lock);
return ret;
@@ -151,19 +189,16 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id,
int regnum, u16 value)
{
struct orion_mdio_dev *dev = bus->priv;
+ const struct orion_mdio_ops *ops = &orion_mdio_smi_ops;
int ret;
mutex_lock(&dev->lock);
- ret = orion_mdio_wait_ready(bus);
+ ret = orion_mdio_wait_ready(ops, bus);
if (ret < 0)
goto out;
- writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
- (regnum << MVMDIO_SMI_PHY_REG_SHIFT) |
- MVMDIO_SMI_WRITE_OPERATION |
- (value << MVMDIO_SMI_DATA_SHIFT)),
- dev->regs);
+ ops->write(dev, mii_id, regnum, value);
out:
mutex_unlock(&dev->lock);
--
2.9.4
More information about the linux-arm-kernel
mailing list