[PATCH 2/3] ARM: OMAP4: hwmod data: add aes

[Tero Kristo]

On 10/06/17 02:12, Sebastian Reichel wrote:
> This fixes the following error during kernel boot:
> 
> platform 4b501000.aes: Cannot lookup hwmod 'aes'
> 
> Unfortunately the AES module is only documented partly
> in the OMAP4430 TRM. I found an old patch from Joel,
> which I took over and updated for currently mainline.
> 
> Signed-off-by: Joel Fernandes <joelf at ti.com>
> Signed-off-by: Sebastian Reichel <sre at kernel.org>
> ---
>   arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 41 ++++++++++++++++++++++++++++++
>   1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> index 94f09c720f29..18feb49e813b 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> @@ -953,6 +953,46 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
>   };
>   
>   /*
> +    Crypto modules AES0/1 belong to:
> +	PD_L4_PER power domain
> +	CD_L4_SEC clock domain
> +	On the L3, the AES modules are mapped to
> +	L3_CLK2: Peripherals and multimedia sub clock domain
> +*/
> +static struct omap_hwmod_class_sysconfig omap44xx_aes1_sysc = {
> +	.rev_offs	= 0x80,
> +	.sysc_offs	= 0x84,
> +	.syss_offs	= 0x88,
> +	.sysc_flags	= SYSS_HAS_RESET_STATUS,
> +};
> +
> +static struct omap_hwmod_class omap44xx_aes1_hwmod_class = {
> +	.name		= "aes1",
> +	.sysc		= &omap44xx_aes1_sysc,
> +};

Change the names of above from aes1 to aes, the parameters are common 
for both aes instances.

> +
> +static struct omap_hwmod omap44xx_aes1_hwmod = {
> +	.name		= "aes",

This should be aes1.

> +	.class		= &omap44xx_aes1_hwmod_class,
> +	.clkdm_name	= "l4_secure_clkdm",
> +	.main_clk	= "aes1_fck",

Change the aes1_fck to l3_div_ck. aes{1,2}_fck should be removed from 
the dts clock data also to avoid conflicts.

> +	.prcm		= {
> +		.omap4	= {
> +			.context_offs	= OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET,
> +			.clkctrl_offs	= OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET,
> +			.modulemode	= MODULEMODE_SWCTRL,
> +		},
> +	},
> +};
> +
> +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes1 = {
> +	.master		= &omap44xx_l4_per_hwmod,
> +	.slave		= &omap44xx_aes1_hwmod,
> +	.clk		= "l4_div_ck",

l3_div_ck.

> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +/*
>    * 'fdif' class
>    * face detection hw accelerator module
>    */
> @@ -4793,6 +4833,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
>   	&omap44xx_l4_abe__wd_timer3_dma,
>   	&omap44xx_mpu__emif1,
>   	&omap44xx_mpu__emif2,
> +	&omap44xx_l3_main_2__aes1,
>   	NULL,
>   };
>   
> 

How about aes2 instance? Please note that the DTS data should be fixed 
also (I have patch available for this I can post if you want to pick it 
up as part of this series.)

-Tero