[PATCH] watchdog: meson-wdt: add support for the watchdog on Meson8 and Meson8m2

Neil Armstrong narmstrong at baylibre.com
Mon Jun 12 00:38:42 PDT 2017


On 06/11/2017 11:52 AM, Martin Blumenstingl wrote:
> The watchdog IP block on Meson8 and Meson8m2 is already supported by the
> existing meson-wdt driver. Meson8 uses the same register bits as Meson6,
> while the newer Meson8m2 SoC uses the same register bits as Meson8b.
> 
> Currently watchdog support on Meson8 SoC already works because
> meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a
> separate compatible for Meson8 makes this more explicit though.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 6 +++++-
>  drivers/watchdog/meson_wdt.c                             | 2 ++
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> index ae70185d96e6..f2fbe1a39d31 100644
> --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> @@ -2,7 +2,11 @@ Meson SoCs Watchdog timer
>  
>  Required properties:
>  
> -- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
> +- compatible : depending on the SoC this should be one of:
> +	"amlogic,meson6-wdt"
> +	"amlogic,meson8-wdt"
> +	"amlogic,meson8b-wdt"
> +	"amlogic,meson8m2-wdt"
>  - reg : Specifies base physical address and size of the registers.
>  
>  Example:
> diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> index 491b9bf13d84..304274c67735 100644
> --- a/drivers/watchdog/meson_wdt.c
> +++ b/drivers/watchdog/meson_wdt.c
> @@ -155,7 +155,9 @@ static const struct watchdog_ops meson_wdt_ops = {
>  
>  static const struct of_device_id meson_wdt_dt_ids[] = {
>  	{ .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data },
> +	{ .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data },
>  	{ .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data },
> +	{ .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids);
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-arm-kernel mailing list