[PATCH v3 05/27] KVM: arm64: vgic-v3: Add ICV_BPR1_EL1 handler
Christoffer Dall
cdall at linaro.org
Fri Jun 9 08:23:10 PDT 2017
On Fri, Jun 09, 2017 at 12:49:34PM +0100, Marc Zyngier wrote:
> Add a handler for reading/writing the guest's view of the ICC_BPR1_EL1
> register, which is located in the ICH_VMCR_EL2.BPR1 field.
>
> Tested-by: Alexander Graf <agraf at suse.de>
> Acked-by: David Daney <david.daney at cavium.com>
> Reviewed-by: Eric Auger <eric.auger at redhat.com>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
Reviewed-by: Christoffer Dall <cdall at linaro.org>
> ---
> virt/kvm/arm/hyp/vgic-v3-sr.c | 57 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c
> index e6c05b95a1b1..fe021abc8b51 100644
> --- a/virt/kvm/arm/hyp/vgic-v3-sr.c
> +++ b/virt/kvm/arm/hyp/vgic-v3-sr.c
> @@ -375,6 +375,57 @@ void __hyp_text __vgic_v3_write_vmcr(u32 vmcr)
>
> #ifdef CONFIG_ARM64
>
> +static int __hyp_text __vgic_v3_bpr_min(void)
> +{
> + /* See Pseudocode for VPriorityGroup */
> + return 8 - vtr_to_nr_pre_bits(read_gicreg(ICH_VTR_EL2));
> +}
> +
> +static unsigned int __hyp_text __vgic_v3_get_bpr0(u32 vmcr)
> +{
> + return (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT;
> +}
> +
> +static unsigned int __hyp_text __vgic_v3_get_bpr1(u32 vmcr)
> +{
> + unsigned int bpr;
> +
> + if (vmcr & ICH_VMCR_CBPR_MASK) {
> + bpr = __vgic_v3_get_bpr0(vmcr);
> + if (bpr < 7)
> + bpr++;
> + } else {
> + bpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT;
> + }
> +
> + return bpr;
> +}
> +
> +static void __hyp_text __vgic_v3_read_bpr1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
> +{
> + vcpu_set_reg(vcpu, rt, __vgic_v3_get_bpr1(vmcr));
> +}
> +
> +static void __hyp_text __vgic_v3_write_bpr1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
> +{
> + u64 val = vcpu_get_reg(vcpu, rt);
> + u8 bpr_min = __vgic_v3_bpr_min();
> +
> + if (vmcr & ICH_VMCR_CBPR_MASK)
> + return;
> +
> + /* Enforce BPR limiting */
> + if (val < bpr_min)
> + val = bpr_min;
> +
> + val <<= ICH_VMCR_BPR1_SHIFT;
> + val &= ICH_VMCR_BPR1_MASK;
> + vmcr &= ~ICH_VMCR_BPR1_MASK;
> + vmcr |= val;
> +
> + __vgic_v3_write_vmcr(vmcr);
> +}
> +
> int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
> {
> int rt;
> @@ -397,6 +448,12 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
> is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ;
>
> switch (sysreg) {
> + case SYS_ICC_BPR1_EL1:
> + if (is_read)
> + fn = __vgic_v3_read_bpr1;
> + else
> + fn = __vgic_v3_write_bpr1;
> + break;
> default:
> return 0;
> }
> --
> 2.11.0
>
More information about the linux-arm-kernel
mailing list