Fwd: [PATCH v7 2/3] iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
Jayachandran C
jnair at caviumnetworks.com
Fri Jun 9 04:38:32 PDT 2017
On Fri, Jun 09, 2017 Robin Murphy wrote:
>
> On 30/05/17 13:03, Geetha sowjanya wrote:
> > From: Linu Cherian <linu.cherian at cavium.com>
> >
> > Cavium ThunderX2 SMMU implementation doesn't support page 1 register space
> > and PAGE0_REGS_ONLY option is enabled as an errata workaround.
> > This option when turned on, replaces all page 1 offsets used for
> > EVTQ_PROD/CONS, PRIQ_PROD/CONS register access with page 0 offsets.
> >
> > SMMU resource size checks are now based on SMMU option PAGE0_REGS_ONLY,
> > since resource size can be either 64k/128k.
> > For this, arm_smmu_device_dt_probe/acpi_probe has been moved before
> > platform_get_resource call, so that SMMU options are set beforehand.
> >
> > Signed-off-by: Linu Cherian <linu.cherian at cavium.com>
> > Signed-off-by: Geetha Sowjanya <geethasowjanya.akula at cavium.com>
> > ---
> > Documentation/arm64/silicon-errata.txt | 1 +
> > .../devicetree/bindings/iommu/arm,smmu-v3.txt | 6 ++
> > drivers/iommu/arm-smmu-v3.c | 64 +++++++++++++++-----
> > 3 files changed, 56 insertions(+), 15 deletions(-)
> >
> > diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
> > index 10f2ddd..4693a32 100644
> > --- a/Documentation/arm64/silicon-errata.txt
> > +++ b/Documentation/arm64/silicon-errata.txt
> > @@ -62,6 +62,7 @@ stable kernels.
> > | Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
> > | Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
> > | Cavium | ThunderX SMMUv2 | #27704 | N/A |
> > +| Cavium | ThunderX2 SMMUv3| #74 | N/A |
> > | | | | |
> > | Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 |
> > | | | | |
> > diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
> > index be57550..607e270 100644
> > --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
> > +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
> > @@ -49,6 +49,12 @@ the PCIe specification.
> > - hisilicon,broken-prefetch-cmd
> > : Avoid sending CMD_PREFETCH_* commands to the SMMU.
> >
> > +- cavium,cn9900-broken-page1-regspace
> > + : Replaces all page 1 offsets used for EVTQ_PROD/CONS,
> > + PRIQ_PROD/CONS register access with page 0 offsets.
> > + Set for Caviun ThunderX2 silicon that doesn't support
> > + SMMU page1 register space.
>
> The indentation's a bit funky here - the rest of this file is actually
> indented with spaces, but either way it's clear your editor isn't set to
> 8-space tabs ;)
>
> > +
> > ** Example
> >
> > smmu at 2b400000 {
> > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> > index 380969a..4e80205 100644
> > --- a/drivers/iommu/arm-smmu-v3.c
> > +++ b/drivers/iommu/arm-smmu-v3.c
> > @@ -412,6 +412,9 @@
> > #define MSI_IOVA_BASE 0x8000000
> > #define MSI_IOVA_LENGTH 0x100000
> >
> > +#define ARM_SMMU_PAGE0_REGS_ONLY(smmu) \
> > + ((smmu)->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY)
>
> At the two places we use this macro, frankly I think it would be clearer
> to just reference smmu->options directly, as we currently do for
> SKIP_PREFETCH. The abstraction also adds more lines than it saves...
>
> > +
> > static bool disable_bypass;
> > module_param_named(disable_bypass, disable_bypass, bool, S_IRUGO);
> > MODULE_PARM_DESC(disable_bypass,
> > @@ -597,6 +600,7 @@ struct arm_smmu_device {
> > u32 features;
> >
> > #define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
> > +#define ARM_SMMU_OPT_PAGE0_REGS_ONLY (1 << 1)
>
> Whitespace again, although this time it's spaces where there should be a
> tab.
>
> > u32 options;
> >
> > struct arm_smmu_cmdq cmdq;
> > @@ -663,9 +667,19 @@ struct arm_smmu_option_prop {
> >
> > static struct arm_smmu_option_prop arm_smmu_options[] = {
> > { ARM_SMMU_OPT_SKIP_PREFETCH, "hisilicon,broken-prefetch-cmd" },
> > + { ARM_SMMU_OPT_PAGE0_REGS_ONLY, "cavium,cn9900-broken-page1-regspace"},
> > { 0, NULL},
> > };
> >
> > +static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,
> > + struct arm_smmu_device *smmu)
> > +{
> > + if (offset > SZ_64K && ARM_SMMU_PAGE0_REGS_ONLY(smmu))
> > + offset -= SZ_64K;
> > +
> > + return smmu->base + offset;
> > +}
> > +
> > static struct arm_smmu_domain *to_smmu_domain(struct iommu_domain *dom)
> > {
> > return container_of(dom, struct arm_smmu_domain, domain);
> > @@ -1961,8 +1975,8 @@ static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
> > return -ENOMEM;
> > }
> >
> > - q->prod_reg = smmu->base + prod_off;
> > - q->cons_reg = smmu->base + cons_off;
> > + q->prod_reg = arm_smmu_page1_fixup(prod_off, smmu);
> > + q->cons_reg = arm_smmu_page1_fixup(cons_off, smmu);
> > q->ent_dwords = dwords;
> >
> > q->q_base = Q_BASE_RWA;
> > @@ -2363,8 +2377,10 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
> >
> > /* Event queue */
> > writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
> > - writel_relaxed(smmu->evtq.q.prod, smmu->base + ARM_SMMU_EVTQ_PROD);
> > - writel_relaxed(smmu->evtq.q.cons, smmu->base + ARM_SMMU_EVTQ_CONS);
> > + writel_relaxed(smmu->evtq.q.prod,
> > + arm_smmu_page1_fixup(ARM_SMMU_EVTQ_PROD, smmu));
> > + writel_relaxed(smmu->evtq.q.cons,
> > + arm_smmu_page1_fixup(ARM_SMMU_EVTQ_CONS, smmu));
This sequence and the arm_smmu_page1_fixup() call is repeated in quite a few
places. I think this errata code is messy because the original driver does not
make the alias page usage explicit.
A patch like the one below (no functional changes) would clean up the original
driver and make the errata change much simpler - any comments?
-- >8 --
Date: Tue, 30 May 2017 15:43:29 +0000
Subject: [PATCH] iommu: arm-smmu-v3: make alias page usage explicit
---
drivers/iommu/arm-smmu-v3.c | 76 +++++++++++++++++++++++++++------------------
1 file changed, 46 insertions(+), 30 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 380969a..11fdb4f 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -171,20 +171,19 @@
#define STRTAB_BASE_CFG_FMT_LINEAR (0 << STRTAB_BASE_CFG_FMT_SHIFT)
#define STRTAB_BASE_CFG_FMT_2LVL (1 << STRTAB_BASE_CFG_FMT_SHIFT)
+#define ARM_SMMU_Q_PROD(qbase) ((qbase) + 0x8)
+#define ARM_SMMU_Q_PROD_PAGE1(qbase) ((qbase) + 0x10008)
+#define ARM_SMMU_Q_CONS(qbase) ((qbase) + 0xc)
+#define ARM_SMMU_Q_CONS_PAGE1(qbase) ((qbase) + 0x1000c)
+
#define ARM_SMMU_CMDQ_BASE 0x90
-#define ARM_SMMU_CMDQ_PROD 0x98
-#define ARM_SMMU_CMDQ_CONS 0x9c
#define ARM_SMMU_EVTQ_BASE 0xa0
-#define ARM_SMMU_EVTQ_PROD 0x100a8
-#define ARM_SMMU_EVTQ_CONS 0x100ac
#define ARM_SMMU_EVTQ_IRQ_CFG0 0xb0
#define ARM_SMMU_EVTQ_IRQ_CFG1 0xb8
#define ARM_SMMU_EVTQ_IRQ_CFG2 0xbc
#define ARM_SMMU_PRIQ_BASE 0xc0
-#define ARM_SMMU_PRIQ_PROD 0x100c8
-#define ARM_SMMU_PRIQ_CONS 0x100cc
#define ARM_SMMU_PRIQ_IRQ_CFG0 0xd0
#define ARM_SMMU_PRIQ_IRQ_CFG1 0xd8
#define ARM_SMMU_PRIQ_IRQ_CFG2 0xdc
@@ -1946,11 +1945,30 @@ static struct iommu_ops arm_smmu_ops = {
};
/* Probing and initialisation functions */
+static int arm_smmu_reset_one_queue(struct arm_smmu_device *smmu,
+ struct arm_smmu_queue *q,
+ unsigned long qoffset,
+ int page_to_use)
+{
+ unsigned long prod, cons;
+
+ writeq_relaxed(q->q_base, smmu->base + qoffset);
+ if (page_to_use == 1) {
+ prod = ARM_SMMU_Q_PROD_PAGE1(qoffset);
+ cons = ARM_SMMU_Q_CONS_PAGE1(qoffset);
+ } else {
+ prod = ARM_SMMU_Q_PROD(qoffset);
+ cons = ARM_SMMU_Q_CONS(qoffset);
+ }
+ writeq_relaxed(q->prod, smmu->base + prod);
+ writeq_relaxed(q->cons, smmu->base + cons);
+}
+
static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
struct arm_smmu_queue *q,
- unsigned long prod_off,
- unsigned long cons_off,
- size_t dwords)
+ unsigned long qoffset,
+ size_t dwords,
+ int page_to_use)
{
size_t qsz = ((1 << q->max_n_shift) * dwords) << 3;
@@ -1961,8 +1979,13 @@ static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
return -ENOMEM;
}
- q->prod_reg = smmu->base + prod_off;
- q->cons_reg = smmu->base + cons_off;
+ if (page_to_use == 1) {
+ q->prod_reg = smmu->base + ARM_SMMU_Q_PROD_PAGE1(qoffset);
+ q->cons_reg = smmu->base + ARM_SMMU_Q_CONS_PAGE1(qoffset);
+ } else {
+ q->prod_reg = smmu->base + ARM_SMMU_Q_PROD(qoffset);
+ q->cons_reg = smmu->base + ARM_SMMU_Q_CONS(qoffset);
+ }
q->ent_dwords = dwords;
q->q_base = Q_BASE_RWA;
@@ -1980,14 +2003,14 @@ static int arm_smmu_init_queues(struct arm_smmu_device *smmu)
/* cmdq */
spin_lock_init(&smmu->cmdq.lock);
- ret = arm_smmu_init_one_queue(smmu, &smmu->cmdq.q, ARM_SMMU_CMDQ_PROD,
- ARM_SMMU_CMDQ_CONS, CMDQ_ENT_DWORDS);
+ ret = arm_smmu_init_one_queue(smmu, &smmu->cmdq.q, ARM_SMMU_CMDQ_BASE,
+ CMDQ_ENT_DWORDS, 0);
if (ret)
return ret;
/* evtq */
- ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, ARM_SMMU_EVTQ_PROD,
- ARM_SMMU_EVTQ_CONS, EVTQ_ENT_DWORDS);
+ ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, ARM_SMMU_EVTQ_BASE,
+ EVTQ_ENT_DWORDS, USE_PAGE1);
if (ret)
return ret;
@@ -1995,8 +2018,8 @@ static int arm_smmu_init_queues(struct arm_smmu_device *smmu)
if (!(smmu->features & ARM_SMMU_FEAT_PRI))
return 0;
- return arm_smmu_init_one_queue(smmu, &smmu->priq.q, ARM_SMMU_PRIQ_PROD,
- ARM_SMMU_PRIQ_CONS, PRIQ_ENT_DWORDS);
+ return arm_smmu_init_one_queue(smmu, &smmu->priq.q, ARM_SMMU_PRIQ_BASE,
+ PRIQ_ENT_DWORDS, 1);
}
static int arm_smmu_init_l1_strtab(struct arm_smmu_device *smmu)
@@ -2332,9 +2355,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
smmu->base + ARM_SMMU_STRTAB_BASE_CFG);
/* Command queue */
- writeq_relaxed(smmu->cmdq.q.q_base, smmu->base + ARM_SMMU_CMDQ_BASE);
- writel_relaxed(smmu->cmdq.q.prod, smmu->base + ARM_SMMU_CMDQ_PROD);
- writel_relaxed(smmu->cmdq.q.cons, smmu->base + ARM_SMMU_CMDQ_CONS);
+ arm_smmu_reset_one_queue(smmu, &smmu->evtq.q,
+ ARM_SMMU_CMDQ_BASE, 0);
enables = CR0_CMDQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
@@ -2362,9 +2384,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
/* Event queue */
- writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
- writel_relaxed(smmu->evtq.q.prod, smmu->base + ARM_SMMU_EVTQ_PROD);
- writel_relaxed(smmu->evtq.q.cons, smmu->base + ARM_SMMU_EVTQ_CONS);
+ arm_smmu_reset_one_queue(smmu, &smmu->evtq.q,
+ ARM_SMMU_EVTQ_BASE, 1);
enables |= CR0_EVTQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
@@ -2376,13 +2397,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
/* PRI queue */
if (smmu->features & ARM_SMMU_FEAT_PRI) {
- writeq_relaxed(smmu->priq.q.q_base,
- smmu->base + ARM_SMMU_PRIQ_BASE);
- writel_relaxed(smmu->priq.q.prod,
- smmu->base + ARM_SMMU_PRIQ_PROD);
- writel_relaxed(smmu->priq.q.cons,
- smmu->base + ARM_SMMU_PRIQ_CONS);
-
+ arm_smmu_reset_one_queue(smmu, &smmu->priq.q,
+ ARM_SMMU_PRIQ_BASE, 1);
enables |= CR0_PRIQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
--
2.7.4
More information about the linux-arm-kernel
mailing list