[PATCH v5 2/3] ARM: dts: imx7: add GPMI NAND and APBH DMA

[Stefan Agner]

On 2017-06-07 08:33, Han Xu wrote:
> On 06/06/2017 01:30 AM, Stefan Agner wrote:
>> Add i.MX 7 APBH DMA and GPMI NAND modules.
>>
>> Signed-off-by: Stefan Agner <stefan at agner.ch>
>> ---
>>   arch/arm/boot/dts/imx7s.dtsi | 32 ++++++++++++++++++++++++++++++++
>>   1 file changed, 32 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
>> index c4f12fd..d71acd8 100644
>> --- a/arch/arm/boot/dts/imx7s.dtsi
>> +++ b/arch/arm/boot/dts/imx7s.dtsi
>> @@ -995,5 +995,37 @@
>>   				status = "disabled";
>>   			};
>>   		};
>> +
>> +		dma_apbh: dma-apbh at 33000000 {
>> +			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
>> +			reg = <0x33000000 0x2000>;
>> +			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
>> +			#dma-cells = <1>;
>> +			dma-channels = <4>;
>> +			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
>> +			clock-names = "dma_apbh_bch", "dma_apbh_io";
> 
> please remove the clock names, I am good with all other changes.

Oh missed that, will do and send v6.

--
Stefan

>> +		};
>> +
>> +		gpmi: gpmi-nand at 33002000{
>> +			compatible = "fsl,imx7d-gpmi-nand";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
>> +			reg-names = "gpmi-nand", "bch";
>> +			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "bch";
>> +			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
>> +				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
>> +			clock-names = "gpmi_io", "gpmi_bch_apb";
>> +			dmas = <&dma_apbh 0>;
>> +			dma-names = "rx-tx";
>> +			status = "disabled";
>> +			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
>> +			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
>> +		};
>>   	};
>>   };