[PATCH v3 2/3] arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file

Matthias Brugger matthias.bgg at gmail.com
Thu Jun 8 09:24:24 PDT 2017



On 08/06/17 18:07, Sean Wang wrote:
> On Thu, 2017-06-08 at 15:52 +0200, Matthias Brugger wrote:
>>
>> On 31/05/17 19:29, sean.wang at mediatek.com wrote:
>>> From: Sean Wang <sean.wang at mediatek.com>
>>>
>>> add basic nodes into the mt7622.dtsi for the system
>>> bring-up which includes ARM CPU, GIC, timer, MediaTek
>>> UART, SYSIRQ and one reserved memory region for ATF.
>>>
>>> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
>>> ---
>>>    arch/arm64/boot/dts/mediatek/mt7622.dtsi | 103 +++++++++++++++++++++++++++++++
>>>    1 file changed, 103 insertions(+)
>>>    create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> new file mode 100644
>>> index 0000000..2031b73
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> @@ -0,0 +1,103 @@
>>> +/*
>>> + * Copyright (c) 2017 MediaTek Inc.
>>> + * Author: Ming Huang <ming.huang at mediatek.com>
>>> + *	   Sean Wang <sean.wang at mediatek.com>
>>> + *
>>> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +/ {
>>> +	compatible = "mediatek,mt7622";
>>> +	interrupt-parent = <&sysirq>;
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	cpus {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <0>;
>>> +
>>> +		cpu0: cpu at 0 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a53", "arm,armv8";
>>> +			reg = <0x0 0x0>;
>>> +			enable-method = "psci";
>>> +			clock-frequency = <1300000000>;
>>> +		};
>>> +
>>> +		cpu1: cpu at 1 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a53", "arm,armv8";
>>> +			reg = <0x0 0x1>;
>>> +			enable-method = "psci";
>>> +			clock-frequency = <1300000000>;
>>> +		};
>>> +	};
>>> +
>>> +	uart_clk: dummy26m {
>>> +		compatible = "fixed-clock";
>>> +		#clock-cells = <0>;
>>> +		clock-frequency = <25000000>;
>>> +	};
>>> +
>>> +	psci {
>>> +		compatible  = "arm,psci-0.2";
>>> +		method      = "smc";
>>> +	};
>>> +
>>> +	reserved-memory {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges;
>>> +
>>> +		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
>>> +		secmon_reserved: secmon at 43000000 {
>>> +			reg = <0 0x43000000 0 0x30000>;
>>> +			no-map;
>>> +		};
>>> +	};
>>> +
>>> +	timer {
>>> +		compatible = "arm,armv8-timer";
>>> +		interrupt-parent = <&gic>;
>>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
>>> +			      IRQ_TYPE_LEVEL_HIGH)>,
>>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
>>> +			      IRQ_TYPE_LEVEL_HIGH)>,
>>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
>>> +			      IRQ_TYPE_LEVEL_HIGH)>,
>>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
>>> +			      IRQ_TYPE_LEVEL_HIGH)>;
>>> +	};
>>> +
>>> +	sysirq: interrupt-controller at 10200620 {
>>> +		compatible = "mediatek,mt7622-sysirq",
>>> +			     "mediatek,mt6577-sysirq";
>>> +		interrupt-controller;
>>> +		#interrupt-cells = <3>;
>>> +		interrupt-parent = <&gic>;
>>> +		reg = <0 0x10200620 0 0x20>;
>>> +	};
>>> +
>>> +	gic: interrupt-controller at 10300000 {
>>> +		compatible = "arm,gic-400";
>>> +		interrupt-controller;
>>> +		#interrupt-cells = <3>;
>>> +		interrupt-parent = <&gic>;
>>> +		reg = <0 0x10310000 0 0x1000>,
>>> +		      <0 0x10320000 0 0x1000>,
>>> +		      <0 0x10340000 0 0x2000>,
>>> +		      <0 0x10360000 0 0x2000>;
>>> +	};
>>> +
>>> +	uart0: serial at 11002000 {
>>> +		compatible = "mediatek,mt7622-uart",
>>> +			     "mediatek,mt6577-uart";
>>> +		reg = <0 0x11002000 0 0x400>;
>>> +		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
>>> +		clocks = <&uart_clk>;
>>
>> mt6577-uart has two clocks. Please fix this.
> 
> Those two real clocks which UART requires will be updated once the
> MT7622 clock driver and the relevant binding header are all ready.
> So currently the UART is using dummy clock node instead.
> 
> Is it allowed?
> 

Yes, no problem with dummy clocks at this point in time, but please 
stick to the binding.

Regards,
Matthias

> 
>> I would appreciate if you could rebase on the mediatek for-next branch
>> (especially for 3/3), which will make it easier for me to take this.
>>
> 
> O.K. I will rebase on your tree
> 
> 	Sean
> 
>> Regards,
>> Matthias
> 
> 



More information about the linux-arm-kernel mailing list