[PATCH 1/2] arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB

[Antoine Tenart]

Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell
Armada 8k DB. This is needed as the MDIO nodes will be disabled in the
CP 110 slave and master dtsi by a following up patch.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 ++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 12442329b80f..771311051421 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -162,6 +162,8 @@
 };
 
 &cpm_mdio {
+	status = "okay";
+
 	phy0: ethernet-phy at 0 {
 		reg = <0>;
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 3cde649f96e4..6af3c39bbb99 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -125,6 +125,8 @@
 };
 
 &cpm_mdio {
+	status = "okay";
+
 	phy1: ethernet-phy at 1 {
 		reg = <1>;
 	};
@@ -170,6 +172,8 @@
 };
 
 &cps_mdio {
+	status = "okay";
+
 	phy0: ethernet-phy at 0 {
 		reg = <0>;
 	};
-- 
2.9.4