[PATCH 6/6] ARM: dts: dra7xx-clocks: Use DPLL_GPU for GPU clocks
Suman Anna
s-anna at ti.com
Wed Jun 7 14:27:30 PDT 2017
From: Subhajit Paul <subhajit_paul at ti.com>
The GPU has two functional clocks - GPU_CORE_GCLK and GPU_HYD_GCLK.
Both of these are mux clocks and are derived from the DPLL_CORE
H14 output clock CORE_GPU_CLK by default. These clocks can also be
be derived from DPLL_PER or DPLL_GPU.
The GPU DPLL provides the output clocks primarily for the GPU.
Configuring the GPU for different OPP clock frequencies is easier
to achieve when using the DPLL_GPU rather than the other two DPLLs
due to:
1. minimal affect on any other output clocks from these DPLLs
2. may require an impossible post-divider values on existing DPLLs
without affecting other clocks.
So, switch the GPU functional clocks to be sourced from GPU DPLL by
default. This is done using the DT standard properties "assigned-clocks"
and "assigned-clock-parents". Newer u-boots (from 2017.01 onwards) reuse
and can update these properties to choose an appropriate one-time fixed
OPP configuration as all the required ABB/AVS setup is performed within
the bootloader. Note that there is no DVFS supported for any of the
non-MPU domains. The DPLL will automatically transition into a low-power
stop mode when the associated output clocks are not utilized or gated
automatically.
This patch also sets the initial values for the DPLL_GPU outputs.
These values are chosen based on the OPP_NOM values defined as per
recommendation from design team. The DPLL locked frequency is kept
at 1277 MHz, so that the value for the divider clock, dpll_gpu_m2_ck,
can be set to 425.67 MHz for OPP_NOM.
Signed-off-by: Subhajit Paul <subhajit_paul at ti.com>
[s-anna at ti.com: revise patch description]
Signed-off-by: Suman Anna <s-anna at ti.com>
---
arch/arm/boot/dts/dra7xx-clocks.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 76e2b7478141..cf229dfabf61 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -414,6 +414,8 @@
compatible = "ti,omap4-dpll-clock";
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+ assigned-clocks = <&dpll_gpu_ck>;
+ assigned-clock-rates = <1277000000>;
};
dpll_gpu_m2_ck: dpll_gpu_m2_ck at 2e8 {
@@ -425,6 +427,8 @@
reg = <0x02e8>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
+ assigned-clocks = <&dpll_gpu_m2_ck>;
+ assigned-clock-rates = <425666667>;
};
dpll_core_m2_ck: dpll_core_m2_ck at 130 {
@@ -1760,6 +1764,8 @@
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <24>;
reg = <0x1220>;
+ assigned-clocks = <&gpu_core_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
gpu_hyd_gclk_mux: gpu_hyd_gclk_mux at 1220 {
@@ -1768,6 +1774,8 @@
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <26>;
reg = <0x1220>;
+ assigned-clocks = <&gpu_hyd_gclk_mux>;
+ assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
l3instr_ts_gclk_div: l3instr_ts_gclk_div at e50 {
--
2.12.0
More information about the linux-arm-kernel
mailing list