[PATCH 4/9] net: mvmdio: move the read valid check into its own function

[Antoine Tenart]

Move the read valid check in its own function. This is needed as a
requirement to factorize the driver to add the xMDIO support in the
future.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 drivers/net/ethernet/marvell/mvmdio.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 96af8d57d9e5..56bbe3990590 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -69,6 +69,11 @@ static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
 	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
 }
 
+static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID);
+}
+
 /* Wait for the SMI unit to be ready for another operation
  */
 static int orion_mdio_wait_ready(struct mii_bus *bus)
@@ -113,7 +118,6 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 			   int regnum)
 {
 	struct orion_mdio_dev *dev = bus->priv;
-	u32 val;
 	int ret;
 
 	mutex_lock(&dev->lock);
@@ -131,14 +135,13 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id,
 	if (ret < 0)
 		goto out;
 
-	val = readl(dev->regs);
-	if (!(val & MVMDIO_SMI_READ_VALID)) {
+	if (orion_mdio_smi_is_read_valid(dev)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	ret = val & GENMASK(15,0);
+	ret = readl(dev->regs) & GENMASK(15,0);
 out:
 	mutex_unlock(&dev->lock);
 	return ret;
-- 
2.9.4