[PATCH 2/9] net: mvmdio: use tabs for defines
Antoine Tenart
antoine.tenart at free-electrons.com
Wed Jun 7 01:38:03 PDT 2017
Cosmetic patch replacing spaces by tabs for defined values.
Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
drivers/net/ethernet/marvell/mvmdio.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 109a2bff334d..17b518b13ae3 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -30,25 +30,25 @@
#include <linux/sched.h>
#include <linux/wait.h>
-#define MVMDIO_SMI_DATA_SHIFT 0
-#define MVMDIO_SMI_PHY_ADDR_SHIFT 16
-#define MVMDIO_SMI_PHY_REG_SHIFT 21
-#define MVMDIO_SMI_READ_OPERATION BIT(26)
-#define MVMDIO_SMI_WRITE_OPERATION 0
-#define MVMDIO_SMI_READ_VALID BIT(27)
-#define MVMDIO_SMI_BUSY BIT(28)
-#define MVMDIO_ERR_INT_CAUSE 0x007C
-#define MVMDIO_ERR_INT_SMI_DONE 0x00000010
-#define MVMDIO_ERR_INT_MASK 0x0080
+#define MVMDIO_SMI_DATA_SHIFT 0
+#define MVMDIO_SMI_PHY_ADDR_SHIFT 16
+#define MVMDIO_SMI_PHY_REG_SHIFT 21
+#define MVMDIO_SMI_READ_OPERATION BIT(26)
+#define MVMDIO_SMI_WRITE_OPERATION 0
+#define MVMDIO_SMI_READ_VALID BIT(27)
+#define MVMDIO_SMI_BUSY BIT(28)
+#define MVMDIO_ERR_INT_CAUSE 0x007C
+#define MVMDIO_ERR_INT_SMI_DONE 0x00000010
+#define MVMDIO_ERR_INT_MASK 0x0080
/*
* SMI Timeout measurements:
* - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
* - Armada 370 (Globalscale Mirabox): 41us to 43us (Polled)
*/
-#define MVMDIO_SMI_TIMEOUT 1000 /* 1000us = 1ms */
-#define MVMDIO_SMI_POLL_INTERVAL_MIN 45
-#define MVMDIO_SMI_POLL_INTERVAL_MAX 55
+#define MVMDIO_SMI_TIMEOUT 1000 /* 1000us = 1ms */
+#define MVMDIO_SMI_POLL_INTERVAL_MIN 45
+#define MVMDIO_SMI_POLL_INTERVAL_MAX 55
struct orion_mdio_dev {
struct mutex lock;
--
2.9.4
More information about the linux-arm-kernel
mailing list