[PATCH v2] ARM: dts: AM43XX: Remove min and max voltage values for dcdc3

[Tony Lindgren]

* Keerthy <j-keerthy at ti.com> [170602 02:27]:
> dcdc3 supplies to DDR on AM43x series. When we set both
> min and max values to the same value. The regulator framework
> sets that particular voltage. This is bad as we are changing
> the ddr voltage when executing from ddr. Hence remove the min and
> max values. The ddr supply voltage shall be set from bootloader
> when not executing from ddr and not while executing from kernel.
> 
> The previous discussion can be found here:
> 
> http://www.spinics.net/lists/devicetree/msg56399.html
> 
> Signed-off-by: Keerthy <j-keerthy at ti.com>

Applying into omap-for-v4.13/dt thanks.

Tony