[PATCH v2 2/3] PCI: Enable PCIe Relaxed Ordering if supported
Ding Tianhong
dingtianhong at huawei.com
Mon Jun 5 23:09:31 PDT 2017
On 2017/6/6 8:28, Alexander Duyck wrote:
> On Mon, Jun 5, 2017 at 6:33 AM, Ding Tianhong <dingtianhong at huawei.com> wrote:
>>
>>
>> On 2017/6/4 2:19, Alexander Duyck wrote:
>>> On Fri, Jun 2, 2017 at 9:04 PM, Ding Tianhong <dingtianhong at huawei.com> wrote:
>>>> The PCIe Device Control Register use the bit 4 to indicate that
>>>> whether the device is permitted to enable relaxed ordering or not.
>>>> But relaxed ordering is not safe for some platform which could only
>>>> use strong write ordering, so devices are allowed (but not required)
>>>> to enable relaxed ordering bit by default.
>>>>
>>>> If a platform support relaxed ordering but does not enable it by
>>>> default, enable it in the PCIe configuration. This allows some device
>>>> to send TLPs with the relaxed ordering attributes set, which may
>>>> improve the performance.
>>>>
>>>> Signed-off-by: Ding Tianhong <dingtianhong at huawei.com>
>>>> ---
>>>> drivers/pci/pci.c | 42 ++++++++++++++++++++++++++++++++++++++++++
>>>> drivers/pci/probe.c | 11 +++++++++++
>>>> include/linux/pci.h | 3 +++
>>>> 3 files changed, 56 insertions(+)
>>>>
>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>> index b01bd5b..f57a374 100644
>>>> --- a/drivers/pci/pci.c
>>>> +++ b/drivers/pci/pci.c
>>>> @@ -4878,6 +4878,48 @@ int pcie_set_mps(struct pci_dev *dev, int mps)
>>>> EXPORT_SYMBOL(pcie_set_mps);
>>>>
>>>> /**
>>>> + * pcie_set_relaxed_ordering - set PCI Express relexed ordering bit
>>>> + * @dev: PCI device to query
>>>> + *
>>>> + * If possible sets relaxed ordering
>>>> + */
>>>> +int pcie_set_relaxed_ordering(struct pci_dev *dev)
>>>> +{
>>>> + return pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
>>>> +}
>>>> +EXPORT_SYMBOL(pcie_set_relaxed_ordering);
>>>> +
>>>> +/**
>>>> + * pcie_clear_relaxed_ordering - clear PCI Express relexed ordering bit
>>>> + * @dev: PCI device to query
>>>> + *
>>>> + * If possible clear relaxed ordering
>>>> + */
>>>> +int pcie_clear_relaxed_ordering(struct pci_dev *dev)
>>>> +{
>>>> + return pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
>>>> +}
>>>> +EXPORT_SYMBOL(pcie_clear_relaxed_ordering);
>>>> +
>>>> +/**
>>>> + * pcie_get_relaxed_ordering - check PCI Express relexed ordering bit
>>>> + * @dev: PCI device to query
>>>> + *
>>>> + * Returns true if relaxed ordering is been set
>>>> + */
>>>> +int pcie_get_relaxed_ordering(struct pci_dev *dev)
>>>> +{
>>>> + u16 v;
>>>> +
>>>> + pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);
>>>> +
>>>> + return (v & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
>>>> +}
>>>> +EXPORT_SYMBOL(pcie_get_relaxed_ordering);
>>>> +
>>>> +/**
>>>> + * pcie_set_mps - set PCI Express maximum payload size
>>>> +/**
>>>> * pcie_get_minimum_link - determine minimum link settings of a PCI device
>>>> * @dev: PCI device to query
>>>> * @speed: storage for minimum speed
>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>> index 19c8950..aeb22b5 100644
>>>> --- a/drivers/pci/probe.c
>>>> +++ b/drivers/pci/probe.c
>>>> @@ -1701,6 +1701,16 @@ static void pci_configure_extended_tags(struct pci_dev *dev)
>>>> PCI_EXP_DEVCTL_EXT_TAG);
>>>> }
>>>>
>>>> +static void pci_configure_relaxed_ordering(struct pci_dev *dev)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + if (dev && (dev->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING))
>>>
>>> So there is a minor issue here. The problem is this is only trying to
>>> modify relaxed ordering for the device itself. That isn't what we
>>> want. What we want is to modify it on all of the upstream port
>>> interfaces where there is something the path to the root complex that
>>> has an issue. So if the root complex has to set the
>>> NO_RELAXED_ORDERING flag on a root port, all of the interfaces below
>>> it that would be pushing traffic toward it should not have the relaxed
>>> ordering bit set.
>>>
>>> Also I am pretty sure this is a PCIe capability, not a PCI capability.
>>> You probably need to make sure you code is making this distinction
>>> which I don't know if it currently is. If you need an example of the
>>> kind of checks I am suggesting just take a look at
>>> pcie_configure_mps(). It is verifying the function is PCIe before
>>> attempting to make any updates. In your case you will probably also
>>> need to make sure there is a bus for you to walk up the chain of.
>>> Otherwise this shouldn't apply.
>>>
>>>
>>>> + pcie_set_relaxed_ordering(dev);
>>>> + else
>>>> + pcie_clear_relaxed_ordering(dev);
>>>> +}
>>>
>>> Also I am not a fan of the way this is handled currently. If you don't
>>> have relaxed ordering set then you don't need to do anything else, if
>>> you do have it set but there is no bus to walk up you shouldn't change
>>> it, and if there is a bus to walk up and you find that the root
>>> complex on that bus has the NO_RELAXED_ORDERING set you should clear
>>> it. Right now this code seems to be enabling relaxed ordering if the
>>> NO_RELAXED_ORDERING flag is set.
>>>
>>
>> Hi Alexander:
>>
>> I reconsidered your suggestion and found I miss something here,
>> decide to modify the configure police as your solution, I think
>> it is close to our goal.
>>
>> Thanks
>> Ding
>>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 19c8950..68dee05 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -1701,6 +1701,45 @@ static void pci_configure_extended_tags(struct pci_dev *dev)
>> PCI_EXP_DEVCTL_EXT_TAG);
>> }
>>
>> +static int pcie_clearing_relaxed_ordering(struct pci_dev *dev, void *data)
>> +{
>> + int origin_ero;
>> +
>> + if (!pci_is_pcie(dev))
>> + return 0;
>> +
>> + origin_ero = pcie_get_relaxed_ordering(dev);
>> +
>> + /* If the releaxed ordering enable bit is not set, do nothing. */
>> + if (!origin_ero)
>> + return 0;
>> +
>> + pcie_clear_relaxed_ordering(dev);
>> +
>> + dev_info(&dev->dev, "Disable Relaxed Ordering\n");
>> +
>> + return 0;
>> +}
>> +
>> +static void pci_configure_relaxed_ordering(struct pci_dev *dev)
>> +{
>> + int origin_ero;
>> +
>> + if (!pci_is_pcie(dev))
>> + return;
>> +
>> + origin_ero = pcie_get_relaxed_ordering(dev);
>> + /* If the releaxed ordering enable bit is not set, do nothing. */
>> + if (!origin_ero)
>> + return;
>> +
>> + if (dev->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
>> + pcie_clear_relaxed_ordering(dev);
>> + pci_walk_bus(dev->bus, pcie_clearing_relaxed_ordering, NULL);
>> + dev_info(&dev->dev, "Disable Relaxed Ordering\n");
>> + }
>> +}
>> +
>
> This is kind of backwards from what I was thinking. Basically what I
> would like to see is at probe time we should work our way up the PCIe
> buses checking to see if any device has
> PCI_DEV_FLAGS_NO_RELAXED_ORDERING set. The assumption is if we can't
> use relaxed ordering with the downstream facing port we probably
> shouldn't be enabling it on our upstream facing port. We don't want to
> be writing to other devices and such since we don't know what they
> need, we will only know what our device needs and if the root complex
> reports that it can't support relaxed ordering we should disable it
> for the device we are initializing and move on.
>
> You might use pcie_get_minimum_link as an example of what I am
> thinking. Basically what we should do is add a function that will
> return true if any of the devices above us do not support relaxed
> ordering, otherwise return false. Then based on that result if we get
> a return that indicates that relaxed ordering is not supported we
> should update our device to disable relaxed ordering. If the device
> above us doesn't exist, or isn't PCIe we should just exit and skip
> updating relaxed ordering since we are probably running in a guest.
>
I think I understand what you mean this time, if no obviously problem,
I will send next version base on this code, thanks.
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 19c8950..777fe5c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1701,6 +1701,48 @@ static void pci_configure_extended_tags(struct pci_dev *dev)
PCI_EXP_DEVCTL_EXT_TAG);
}
+/**
+ * pci_dev_relaxed_ordering_disabled - check if the PCI device
+ * should disable the relaxed ordering attribute.
+ * @dev: PCI device
+ *
+ * Return true if any of the PCI devices above us do not support
+ * relaxed ordering.
+ */
+static int pcie_check_relaxed_ordering_status(struct pci_dev *dev)
+{
+ int ro_disabled = 0;
+
+ while(dev) {
+ if (dev->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
+ ro_disabled = 1;
+ break;
+ }
+ dev = dev->bus->self;
+ }
+
+ return ro_disabled;
+}
+
+static void pci_configure_relaxed_ordering(struct pci_dev *dev)
+{
+ struct pci_dev *bridge = pci_upstream_bridge(dev);
+ int origin_ero;
+
+ if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
+ return;
+
+ origin_ero = pcie_get_relaxed_ordering(dev);
+ /* If the releaxed ordering enable bit is not set, do nothing. */
+ if (!origin_ero)
+ return;
+
+ if (pcie_check_relaxed_ordering_status(dev)) {
+ pcie_clear_relaxed_ordering(dev);
+ dev_info(&dev->dev, "Disable Relaxed Ordering\n");
+ }
+}
+
>> static void pci_configure_device(struct pci_dev *dev)
>> {
>> struct hotplug_params hpp;
>> @@ -1708,6 +1747,7 @@ static void pci_configure_device(struct pci_dev *dev)
>>
>> pci_configure_mps(dev);
>> pci_configure_extended_tags(dev);
>> + pci_configure_relaxed_ordering(dev);
>>
>> memset(&hpp, 0, sizeof(hpp));
>> ret = pci_get_hp_params(dev, &hpp);
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>
>>
>>
>>>> +
>>>> static void pci_configure_device(struct pci_dev *dev)
>>>> {
>>>> struct hotplug_params hpp;
>>>> @@ -1708,6 +1718,7 @@ static void pci_configure_device(struct pci_dev *dev)
>>>>
>>>> pci_configure_mps(dev);
>>>> pci_configure_extended_tags(dev);
>>>> + pci_configure_relaxed_ordering(dev);
>>>>
>>>> memset(&hpp, 0, sizeof(hpp));
>>>> ret = pci_get_hp_params(dev, &hpp);
>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>> index e1e8428..84bd6af 100644
>>>> --- a/include/linux/pci.h
>>>> +++ b/include/linux/pci.h
>>>> @@ -1105,6 +1105,9 @@ int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
>>>> void pci_pme_wakeup_bus(struct pci_bus *bus);
>>>> void pci_d3cold_enable(struct pci_dev *dev);
>>>> void pci_d3cold_disable(struct pci_dev *dev);
>>>> +int pcie_set_relaxed_ordering(struct pci_dev *dev);
>>>> +int pcie_clear_relaxed_ordering(struct pci_dev *dev);
>>>> +int pcie_get_relaxed_ordering(struct pci_dev *dev);
>>>>
>>>> static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
>>>> bool enable)
>>>> --
>>>> 1.9.0
>>>>
>>>>
>>>
>>> .
>>>
>>
>
> .
>
More information about the linux-arm-kernel
mailing list