[PATCH] ARM: dts: imx6: Fix PCI GPIO reset polarity

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

The imx6 PCI driver ignores the GPIO polarity from 'reset-gpio' and
considers that the PCI reset is active low, unless the
property 'reset-gpio-active-high' is present.

Fix the device tree description by explicitly passing the 
'GPIO_ACTIVE_LOW' flag to the 'reset-gpio' property.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi            | 2 +-
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts      | 2 +-
 arch/arm/boot/dts/imx6q-novena.dts           | 2 +-
 arch/arm/boot/dts/imx6qdl-apf6dev.dtsi       | 2 +-
 arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts     | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 14fa6b2..5fcb037 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -321,7 +321,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	fsl,tx-swing-full = <103>;
 	fsl,tx-swing-low = <103>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 0c5b2c3..33eb7f1 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -435,7 +435,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 0>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index c21db67..d83cfb6 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -446,7 +446,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie_novena>;
-	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index 550e100..9cd2a74 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -232,7 +232,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index ed6a89f..1b18728 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -335,7 +335,7 @@
 };
 
 &pcie {
-	reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 6e5cb6a..d81b007 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -374,7 +374,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 0>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index ac1989e..c5578d1 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -296,7 +296,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.7.4