[PATCH] ARM: dts: imx: Fix Ethernet PHY reset polarity

[Andrew Lunn]

On Sun, Jun 04, 2017 at 02:31:15PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and
> considers that the Ethernet PHY is active low, unless the
> property 'phy-reset-active-high' is present.
> 
> Fix the device tree description by explicitly passing the 
> 'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

    Andrew