[PATCH v14 2/7] power: add power sequence library
Peter Chen
hzpeterchen at gmail.com
Sun Jun 4 23:51:23 PDT 2017
On Thu, May 18, 2017 at 08:48:58AM +0800, Peter Chen wrote:
> We have an well-known problem that the device needs to do some power
> sequence before it can be recognized by related host, the typical
> example like hard-wired mmc devices and usb devices.
>
> This power sequence is hard to be described at device tree and handled by
> related host driver, so we have created a common power sequence
> library to cover this requirement. The core code has supplied
> some common helpers for host driver, and individual power sequence
> libraries handle kinds of power sequence for devices. The pwrseq
> librares always need to allocate extra instance for compatible
> string match.
>
> pwrseq_generic is intended for general purpose of power sequence, which
> handles gpios and clocks currently, and can cover other controls in
> future. The host driver just needs to call of_pwrseq_on/of_pwrseq_off
> if only one power sequence is needed, else call of_pwrseq_on_list
> /of_pwrseq_off_list instead (eg, USB hub driver).
>
> For new power sequence library, it can add its compatible string
> to pwrseq_of_match_table, then the pwrseq core will match it with
> DT's, and choose this library at runtime.
Ping....
>
> Signed-off-by: Peter Chen <peter.chen at nxp.com>
> Tested-by: Maciej S. Szmigiero <mail at maciej.szmigiero.name>
> Tested-by Joshua Clayton <stillcompiling at gmail.com>
> Reviewed-by: Matthias Kaehlcke <mka at chromium.org>
> Tested-by: Matthias Kaehlcke <mka at chromium.org>
> ---
> Documentation/power/power-sequence/design.rst | 54 +++++
> MAINTAINERS | 9 +
> drivers/power/Kconfig | 1 +
> drivers/power/Makefile | 1 +
> drivers/power/pwrseq/Kconfig | 20 ++
> drivers/power/pwrseq/Makefile | 2 +
> drivers/power/pwrseq/core.c | 335 ++++++++++++++++++++++++++
> drivers/power/pwrseq/pwrseq_generic.c | 234 ++++++++++++++++++
> include/linux/power/pwrseq.h | 81 +++++++
> 9 files changed, 737 insertions(+)
> create mode 100644 Documentation/power/power-sequence/design.rst
> create mode 100644 drivers/power/pwrseq/Kconfig
> create mode 100644 drivers/power/pwrseq/Makefile
> create mode 100644 drivers/power/pwrseq/core.c
> create mode 100644 drivers/power/pwrseq/pwrseq_generic.c
> create mode 100644 include/linux/power/pwrseq.h
>
> diff --git a/Documentation/power/power-sequence/design.rst b/Documentation/power/power-sequence/design.rst
> new file mode 100644
> index 0000000..554608e
> --- /dev/null
> +++ b/Documentation/power/power-sequence/design.rst
> @@ -0,0 +1,54 @@
> +====================================
> +Power Sequence Library
> +====================================
> +
> +:Date: Feb, 2017
> +:Author: Peter Chen <peter.chen at nxp.com>
> +
> +
> +Introduction
> +============
> +
> +We have an well-known problem that the device needs to do a power
> +sequence before it can be recognized by related host, the typical
> +examples are hard-wired mmc devices and usb devices. The host controller
> +can't know what kinds of this device is in its bus if the power
> +sequence has not done, since the related devices driver's probe calling
> +is determined by runtime according to eunumeration results. Besides,
> +the devices may have custom power sequence, so the power sequence library
> +which is independent with the devices is needed.
> +
> +Design
> +============
> +
> +The power sequence library includes the core file and customer power
> +sequence library. The core file exports interfaces are called by
> +host controller driver for power sequence and customer power sequence
> +library files to register its power sequence instance to global
> +power sequence list. The custom power sequence library creates power
> +sequence instance and implement custom power sequence.
> +
> +Since the power sequence describes hardware design, the description is
> +located at board description file, eg, device tree dts file. And
> +a specific power sequence belongs to device, so its description
> +is under the device node, please refer to:
> +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt
> +
> +Custom power sequence library allocates one power sequence instance at
> +bootup periods using postcore_initcall, this static allocated instance is
> +used to compare with device-tree (DT) node to see if this library can be
> +used for the node or not. When the result is matched, the core API will
> +try to get resourses (->get, implemented at each library) for power
> +sequence, if all resources are got, it will try to allocate another
> +instance for next possible request from host driver.
> +
> +Then, the host controller driver can carry out power sequence on for this
> +DT node, the library will do corresponding operations, like open clocks,
> +toggle gpio, etc. The power sequence off routine will close and free the
> +resources, and is called when the parent is removed. And the power
> +sequence suspend and resume routine can be called at host driver's
> +suspend and resume routine if needed.
> +
> +The exported interfaces
> +.. kernel-doc:: drivers/power/pwrseq/core.c
> + :export:
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f7d568b..93b07aa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10188,6 +10188,15 @@ F: include/linux/pm_*
> F: include/linux/powercap.h
> F: drivers/powercap/
>
> +POWER SEQUENCE LIBRARY
> +M: Peter Chen <Peter.Chen at nxp.com>
> +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
> +L: linux-pm at vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/power/pwrseq/
> +F: drivers/power/pwrseq/
> +F: include/linux/power/pwrseq.h
> +
> POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
> M: Sebastian Reichel <sre at kernel.org>
> L: linux-pm at vger.kernel.org
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 63454b5..c1bb046 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -1,3 +1,4 @@
> source "drivers/power/avs/Kconfig"
> source "drivers/power/reset/Kconfig"
> source "drivers/power/supply/Kconfig"
> +source "drivers/power/pwrseq/Kconfig"
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index ff35c71..7db8035 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_POWER_AVS) += avs/
> obj-$(CONFIG_POWER_RESET) += reset/
> obj-$(CONFIG_POWER_SUPPLY) += supply/
> +obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/
> diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
> new file mode 100644
> index 0000000..c6b3569
> --- /dev/null
> +++ b/drivers/power/pwrseq/Kconfig
> @@ -0,0 +1,20 @@
> +#
> +# Power Sequence library
> +#
> +
> +menuconfig POWER_SEQUENCE
> + bool "Power sequence control"
> + help
> + It is used for drivers which needs to do power sequence
> + (eg, turn on clock, toggle reset gpio) before the related
> + devices can be found by hardware, eg, USB bus.
> +
> +if POWER_SEQUENCE
> +
> +config PWRSEQ_GENERIC
> + bool "Generic power sequence control"
> + depends on OF
> + help
> + This is the generic power sequence control library, and is
> + supposed to support common power sequence usage.
> +endif
> diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
> new file mode 100644
> index 0000000..ad82389
> --- /dev/null
> +++ b/drivers/power/pwrseq/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_POWER_SEQUENCE) += core.o
> +obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o
> diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c
> new file mode 100644
> index 0000000..3d19e62
> --- /dev/null
> +++ b/drivers/power/pwrseq/core.c
> @@ -0,0 +1,335 @@
> +/*
> + * core.c power sequence core file
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Author: Peter Chen <peter.chen at nxp.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.
> + */
> +
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/power/pwrseq.h>
> +
> +static DEFINE_MUTEX(pwrseq_list_mutex);
> +static LIST_HEAD(pwrseq_list);
> +
> +static int pwrseq_get(struct device_node *np, struct pwrseq *p)
> +{
> + if (p && p->get)
> + return p->get(np, p);
> +
> + return -ENOTSUPP;
> +}
> +
> +static int pwrseq_on(struct pwrseq *p)
> +{
> + if (p && p->on)
> + return p->on(p);
> +
> + return -ENOTSUPP;
> +}
> +
> +static void pwrseq_off(struct pwrseq *p)
> +{
> + if (p && p->off)
> + p->off(p);
> +}
> +
> +static void pwrseq_put(struct pwrseq *p)
> +{
> + if (p && p->put)
> + p->put(p);
> +}
> +
> +/**
> + * pwrseq_register - Add pwrseq instance to global pwrseq list
> + *
> + * @pwrseq: the pwrseq instance
> + */
> +void pwrseq_register(struct pwrseq *pwrseq)
> +{
> + mutex_lock(&pwrseq_list_mutex);
> + list_add(&pwrseq->node, &pwrseq_list);
> + mutex_unlock(&pwrseq_list_mutex);
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_register);
> +
> +/**
> + * pwrseq_unregister - Remove pwrseq instance from global pwrseq list
> + *
> + * @pwrseq: the pwrseq instance
> + */
> +void pwrseq_unregister(struct pwrseq *pwrseq)
> +{
> + mutex_lock(&pwrseq_list_mutex);
> + list_del(&pwrseq->node);
> + mutex_unlock(&pwrseq_list_mutex);
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_unregister);
> +
> +static struct pwrseq *pwrseq_find_available_instance(struct device_node *np)
> +{
> + struct pwrseq *pwrseq;
> +
> + mutex_lock(&pwrseq_list_mutex);
> + list_for_each_entry(pwrseq, &pwrseq_list, node) {
> + if (pwrseq->used)
> + continue;
> +
> + /* compare compatible string for pwrseq node */
> + if (of_match_node(pwrseq->pwrseq_of_match_table, np)) {
> + pwrseq->used = true;
> + mutex_unlock(&pwrseq_list_mutex);
> + return pwrseq;
> + }
> +
> + /* return generic pwrseq instance */
> + if (!strcmp(pwrseq->pwrseq_of_match_table->compatible,
> + "generic")) {
> + pr_debug("using generic pwrseq instance for %s\n",
> + np->full_name);
> + pwrseq->used = true;
> + mutex_unlock(&pwrseq_list_mutex);
> + return pwrseq;
> + }
> + }
> + mutex_unlock(&pwrseq_list_mutex);
> + pr_debug("Can't find any pwrseq instances for %s\n", np->full_name);
> +
> + return NULL;
> +}
> +
> +/**
> + * of_pwrseq_on - Carry out power sequence on for device node
> + *
> + * @np: the device node would like to power on
> + *
> + * Carry out a single device power on. If multiple devices
> + * need to be handled, use of_pwrseq_on_list() instead.
> + *
> + * Return a pointer to the power sequence instance on success,
> + * or an error code otherwise.
> + */
> +struct pwrseq *of_pwrseq_on(struct device_node *np)
> +{
> + struct pwrseq *pwrseq;
> + int ret;
> +
> + pwrseq = pwrseq_find_available_instance(np);
> + if (!pwrseq)
> + return ERR_PTR(-ENOENT);
> +
> + ret = pwrseq_get(np, pwrseq);
> + if (ret) {
> + /* Mark current pwrseq as unused */
> + pwrseq->used = false;
> + return ERR_PTR(ret);
> + }
> +
> + ret = pwrseq_on(pwrseq);
> + if (ret)
> + goto pwr_put;
> +
> + return pwrseq;
> +
> +pwr_put:
> + pwrseq_put(pwrseq);
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(of_pwrseq_on);
> +
> +/**
> + * of_pwrseq_off - Carry out power sequence off for this pwrseq instance
> + *
> + * @pwrseq: the pwrseq instance which related device would like to be off
> + *
> + * This API is used to power off single device, it is the opposite
> + * operation for of_pwrseq_on.
> + */
> +void of_pwrseq_off(struct pwrseq *pwrseq)
> +{
> + pwrseq_off(pwrseq);
> + pwrseq_put(pwrseq);
> +}
> +EXPORT_SYMBOL_GPL(of_pwrseq_off);
> +
> +/**
> + * of_pwrseq_on_list - Carry out power sequence on for list
> + *
> + * @np: the device node would like to power on
> + * @head: the list head for pwrseq list on this bus
> + *
> + * This API is used to power on multiple devices at single bus.
> + * If there are several devices on bus (eg, USB bus), uses this
> + * this API. Otherwise, use of_pwrseq_on instead. After the device
> + * is powered on successfully, it will be added to pwrseq list for
> + * this bus. The caller needs to use mutex_lock for concurrent.
> + *
> + * Return 0 on success, or an error value otherwise.
> + */
> +int of_pwrseq_on_list(struct device_node *np, struct list_head *head)
> +{
> + struct pwrseq *pwrseq;
> + struct pwrseq_list_per_dev *pwrseq_list_node;
> +
> + pwrseq_list_node = kzalloc(sizeof(*pwrseq_list_node), GFP_KERNEL);
> + if (!pwrseq_list_node)
> + return -ENOMEM;
> +
> + pwrseq = of_pwrseq_on(np);
> + if (IS_ERR(pwrseq)) {
> + kfree(pwrseq_list_node);
> + return PTR_ERR(pwrseq);
> + }
> +
> + pwrseq_list_node->pwrseq = pwrseq;
> + list_add(&pwrseq_list_node->list, head);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pwrseq_on_list);
> +
> +/**
> + * of_pwrseq_off_list - Carry out power sequence off for the list
> + *
> + * @head: the list head for pwrseq instance list on this bus
> + *
> + * This API is used to power off all devices on this bus, it is
> + * the opposite operation for of_pwrseq_on_list.
> + * The caller needs to use mutex_lock for concurrent.
> + */
> +void of_pwrseq_off_list(struct list_head *head)
> +{
> + struct pwrseq *pwrseq;
> + struct pwrseq_list_per_dev *pwrseq_list_node, *tmp_node;
> +
> + list_for_each_entry_safe(pwrseq_list_node, tmp_node, head, list) {
> + pwrseq = pwrseq_list_node->pwrseq;
> + of_pwrseq_off(pwrseq);
> + list_del(&pwrseq_list_node->list);
> + kfree(pwrseq_list_node);
> + }
> +}
> +EXPORT_SYMBOL_GPL(of_pwrseq_off_list);
> +
> +/**
> + * pwrseq_suspend - Carry out power sequence suspend for this pwrseq instance
> + *
> + * @pwrseq: the pwrseq instance
> + *
> + * This API is used to do suspend operation on pwrseq instance.
> + *
> + * Return 0 on success, or an error value otherwise.
> + */
> +int pwrseq_suspend(struct pwrseq *p)
> +{
> + int ret = 0;
> +
> + if (p && p->suspend)
> + ret = p->suspend(p);
> + else
> + return ret;
> +
> + if (!ret)
> + p->suspended = true;
> + else
> + pr_err("%s failed\n", __func__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_suspend);
> +
> +/**
> + * pwrseq_resume - Carry out power sequence resume for this pwrseq instance
> + *
> + * @pwrseq: the pwrseq instance
> + *
> + * This API is used to do resume operation on pwrseq instance.
> + *
> + * Return 0 on success, or an error value otherwise.
> + */
> +int pwrseq_resume(struct pwrseq *p)
> +{
> + int ret = 0;
> +
> + if (p && p->resume)
> + ret = p->resume(p);
> + else
> + return ret;
> +
> + if (!ret)
> + p->suspended = false;
> + else
> + pr_err("%s failed\n", __func__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_resume);
> +
> +/**
> + * pwrseq_suspend_list - Carry out power sequence suspend for list
> + *
> + * @head: the list head for pwrseq instance list on this bus
> + *
> + * This API is used to do suspend on all power sequence instances on this bus.
> + * The caller needs to use mutex_lock for concurrent.
> + */
> +int pwrseq_suspend_list(struct list_head *head)
> +{
> + struct pwrseq *pwrseq;
> + struct pwrseq_list_per_dev *pwrseq_list_node;
> + int ret = 0;
> +
> + list_for_each_entry(pwrseq_list_node, head, list) {
> + ret = pwrseq_suspend(pwrseq_list_node->pwrseq);
> + if (ret)
> + break;
> + }
> +
> + if (ret) {
> + list_for_each_entry(pwrseq_list_node, head, list) {
> + pwrseq = pwrseq_list_node->pwrseq;
> + if (pwrseq->suspended)
> + pwrseq_resume(pwrseq);
> + }
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_suspend_list);
> +
> +/**
> + * pwrseq_resume_list - Carry out power sequence resume for the list
> + *
> + * @head: the list head for pwrseq instance list on this bus
> + *
> + * This API is used to do resume on all power sequence instances on this bus.
> + * The caller needs to use mutex_lock for concurrent.
> + */
> +int pwrseq_resume_list(struct list_head *head)
> +{
> + struct pwrseq_list_per_dev *pwrseq_list_node;
> + int ret = 0;
> +
> + list_for_each_entry(pwrseq_list_node, head, list) {
> + ret = pwrseq_resume(pwrseq_list_node->pwrseq);
> + if (ret)
> + break;
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pwrseq_resume_list);
> diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c
> new file mode 100644
> index 0000000..4e7c090
> --- /dev/null
> +++ b/drivers/power/pwrseq/pwrseq_generic.c
> @@ -0,0 +1,234 @@
> +/*
> + * pwrseq_generic.c Generic power sequence handling
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Author: Peter Chen <peter.chen at nxp.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/slab.h>
> +
> +#include <linux/power/pwrseq.h>
> +
> +struct pwrseq_generic {
> + struct pwrseq pwrseq;
> + struct gpio_desc *gpiod_reset;
> + struct clk *clks[PWRSEQ_MAX_CLKS];
> + u32 duration_us;
> + bool suspended;
> +};
> +
> +#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq)
> +
> +static int pwrseq_generic_alloc_instance(void);
> +static const struct of_device_id generic_id_table[] = {
> + { .compatible = "generic",},
> + { /* sentinel */ }
> +};
> +
> +static int pwrseq_generic_suspend(struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + int clk;
> +
> + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--)
> + clk_disable_unprepare(pwrseq_gen->clks[clk]);
> +
> + pwrseq_gen->suspended = true;
> + return 0;
> +}
> +
> +static int pwrseq_generic_resume(struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + int clk, ret = 0;
> +
> + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) {
> + ret = clk_prepare_enable(pwrseq_gen->clks[clk]);
> + if (ret) {
> + pr_err("Can't enable clock, ret=%d\n", ret);
> + goto err_disable_clks;
> + }
> + }
> +
> + pwrseq_gen->suspended = false;
> + return ret;
> +
> +err_disable_clks:
> + while (--clk >= 0)
> + clk_disable_unprepare(pwrseq_gen->clks[clk]);
> +
> + return ret;
> +}
> +
> +static void pwrseq_generic_put(struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + int clk;
> +
> + if (pwrseq_gen->gpiod_reset)
> + gpiod_put(pwrseq_gen->gpiod_reset);
> +
> + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++)
> + clk_put(pwrseq_gen->clks[clk]);
> +
> + pwrseq_unregister(&pwrseq_gen->pwrseq);
> + kfree(pwrseq_gen);
> +}
> +
> +static void pwrseq_generic_off(struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + int clk;
> +
> + if (pwrseq_gen->suspended)
> + return;
> +
> + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--)
> + clk_disable_unprepare(pwrseq_gen->clks[clk]);
> +}
> +
> +static int pwrseq_generic_on(struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + int clk, ret = 0;
> + struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset;
> +
> + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) {
> + ret = clk_prepare_enable(pwrseq_gen->clks[clk]);
> + if (ret) {
> + pr_err("Can't enable clock, ret=%d\n", ret);
> + goto err_disable_clks;
> + }
> + }
> +
> + if (gpiod_reset) {
> + u32 duration_us = pwrseq_gen->duration_us;
> +
> + if (duration_us <= 10)
> + udelay(10);
> + else
> + usleep_range(duration_us, duration_us + 100);
> + gpiod_set_value(gpiod_reset, 0);
> + }
> +
> + return ret;
> +
> +err_disable_clks:
> + while (--clk >= 0)
> + clk_disable_unprepare(pwrseq_gen->clks[clk]);
> +
> + return ret;
> +}
> +
> +static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq)
> +{
> + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
> + enum of_gpio_flags flags;
> + int reset_gpio, clk, ret = 0;
> +
> + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) {
> + pwrseq_gen->clks[clk] = of_clk_get(np, clk);
> + if (IS_ERR(pwrseq_gen->clks[clk])) {
> + ret = PTR_ERR(pwrseq_gen->clks[clk]);
> + if (ret != -ENOENT)
> + goto err_put_clks;
> + pwrseq_gen->clks[clk] = NULL;
> + break;
> + }
> + }
> +
> + reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags);
> + if (gpio_is_valid(reset_gpio)) {
> + unsigned long gpio_flags;
> +
> + if (flags & OF_GPIO_ACTIVE_LOW)
> + gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW;
> + else
> + gpio_flags = GPIOF_OUT_INIT_HIGH;
> +
> + ret = gpio_request_one(reset_gpio, gpio_flags,
> + "pwrseq-reset-gpios");
> + if (ret)
> + goto err_put_clks;
> +
> + pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio);
> + of_property_read_u32(np, "reset-duration-us",
> + &pwrseq_gen->duration_us);
> + } else if (reset_gpio == -ENOENT) {
> + ; /* no such gpio */
> + } else {
> + ret = reset_gpio;
> + pr_err("Failed to get reset gpio on %s, err = %d\n",
> + np->full_name, reset_gpio);
> + goto err_put_clks;
> + }
> +
> + /* allocate new one for later pwrseq instance request */
> + ret = pwrseq_generic_alloc_instance();
> + if (ret)
> + goto err_put_gpio;
> +
> + return 0;
> +
> +err_put_gpio:
> + if (pwrseq_gen->gpiod_reset)
> + gpiod_put(pwrseq_gen->gpiod_reset);
> +err_put_clks:
> + while (--clk >= 0)
> + clk_put(pwrseq_gen->clks[clk]);
> + return ret;
> +}
> +
> +/**
> + * pwrseq_generic_alloc_instance - power sequence instance allocation
> + *
> + * This function is used to allocate one generic power sequence instance,
> + * it is called when the system boots up and after one power sequence
> + * instance is got successfully.
> + *
> + * Return zero on success or an error code otherwise.
> + */
> +static int pwrseq_generic_alloc_instance(void)
> +{
> + struct pwrseq_generic *pwrseq_gen;
> +
> + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL);
> + if (!pwrseq_gen)
> + return -ENOMEM;
> +
> + pwrseq_gen->pwrseq.pwrseq_of_match_table = generic_id_table;
> + pwrseq_gen->pwrseq.get = pwrseq_generic_get;
> + pwrseq_gen->pwrseq.on = pwrseq_generic_on;
> + pwrseq_gen->pwrseq.off = pwrseq_generic_off;
> + pwrseq_gen->pwrseq.put = pwrseq_generic_put;
> + pwrseq_gen->pwrseq.suspend = pwrseq_generic_suspend;
> + pwrseq_gen->pwrseq.resume = pwrseq_generic_resume;
> +
> + pwrseq_register(&pwrseq_gen->pwrseq);
> + return 0;
> +}
> +
> +/* Allocate one pwrseq instance during boots up */
> +static int __init pwrseq_generic_register(void)
> +{
> + return pwrseq_generic_alloc_instance();
> +}
> +postcore_initcall(pwrseq_generic_register)
> diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h
> new file mode 100644
> index 0000000..cbc344c
> --- /dev/null
> +++ b/include/linux/power/pwrseq.h
> @@ -0,0 +1,81 @@
> +#ifndef __LINUX_PWRSEQ_H
> +#define __LINUX_PWRSEQ_H
> +
> +#include <linux/of.h>
> +
> +#define PWRSEQ_MAX_CLKS 3
> +
> +/**
> + * struct pwrseq - the power sequence structure
> + * @pwrseq_of_match_table: the OF device id table this pwrseq library supports
> + * @node: the list pointer to be added to pwrseq list
> + * @get: the API is used to get pwrseq instance from the device node
> + * @on: do power on for this pwrseq instance
> + * @off: do power off for this pwrseq instance
> + * @put: release the resources on this pwrseq instance
> + * @suspend: do suspend operation on this pwrseq instance
> + * @resume: do resume operation on this pwrseq instance
> + * @used: this pwrseq instance is used by device
> + */
> +struct pwrseq {
> + const struct of_device_id *pwrseq_of_match_table;
> + struct list_head node;
> + int (*get)(struct device_node *np, struct pwrseq *p);
> + int (*on)(struct pwrseq *p);
> + void (*off)(struct pwrseq *p);
> + void (*put)(struct pwrseq *p);
> + int (*suspend)(struct pwrseq *p);
> + int (*resume)(struct pwrseq *p);
> + bool used;
> + bool suspended;
> +};
> +
> +/* used for power sequence instance list in one driver */
> +struct pwrseq_list_per_dev {
> + struct pwrseq *pwrseq;
> + struct list_head list;
> +};
> +
> +#if IS_ENABLED(CONFIG_POWER_SEQUENCE)
> +void pwrseq_register(struct pwrseq *pwrseq);
> +void pwrseq_unregister(struct pwrseq *pwrseq);
> +struct pwrseq *of_pwrseq_on(struct device_node *np);
> +void of_pwrseq_off(struct pwrseq *pwrseq);
> +int of_pwrseq_on_list(struct device_node *np, struct list_head *head);
> +void of_pwrseq_off_list(struct list_head *head);
> +int pwrseq_suspend(struct pwrseq *p);
> +int pwrseq_resume(struct pwrseq *p);
> +int pwrseq_suspend_list(struct list_head *head);
> +int pwrseq_resume_list(struct list_head *head);
> +#else
> +static inline void pwrseq_register(struct pwrseq *pwrseq) {}
> +static inline void pwrseq_unregister(struct pwrseq *pwrseq) {}
> +static inline struct pwrseq *of_pwrseq_on(struct device_node *np)
> +{
> + return NULL;
> +}
> +static void of_pwrseq_off(struct pwrseq *pwrseq) {}
> +static int of_pwrseq_on_list(struct device_node *np, struct list_head *head)
> +{
> + return 0;
> +}
> +static void of_pwrseq_off_list(struct list_head *head) {}
> +static int pwrseq_suspend(struct pwrseq *p)
> +{
> + return 0;
> +}
> +static int pwrseq_resume(struct pwrseq *p)
> +{
> + return 0;
> +}
> +static int pwrseq_suspend_list(struct list_head *head)
> +{
> + return 0;
> +}
> +static int pwrseq_resume_list(struct list_head *head)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_POWER_SEQUENCE */
> +
> +#endif /* __LINUX_PWRSEQ_H */
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
More information about the linux-arm-kernel
mailing list