[PATCH 42/58] ARM: dts: at91: vinco: use TCB2 as clocksource

[Gregory CLEMENT]

Hi Alexandre,
 
 On mar., mai 30 2017, Alexandre Belloni <alexandre.belloni at free-electrons.com> wrote:

> As TCB2 doesn't have any output pins, use it as a clocksource.
>

In case you have not already applied it:

Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>

Thanks,

Gregory


> Cc: Gregory CLEMENT <gregory.clement at free-electrons.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> ---
>  arch/arm/boot/dts/at91-vinco.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
> index e0c0b2897a49..d495a5e2aeac 100644
> --- a/arch/arm/boot/dts/at91-vinco.dts
> +++ b/arch/arm/boot/dts/at91-vinco.dts
> @@ -151,6 +151,18 @@
>  				status = "okay";
>  			};
>  
> +			tcb2: timer at fc024000 {
> +				timer at 0 {
> +					compatible = "atmel,tcb-timer";
> +					reg = <0>;
> +				};
> +
> +				timer at 1 {
> +					compatible = "atmel,tcb-timer";
> +					reg = <1>;
> +				};
> +			};
> +
>  			macb1: ethernet at fc028000 {
>  				phy-mode = "rmii";
>  				status = "okay";
> -- 
> 2.11.0
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com