[PATCH v7 16/34] [media] add Omnivision OV5640 sensor driver

[Sakari Ailus]

Hi Pavel,

On Wed, May 31, 2017 at 09:58:21PM +0200, Pavel Machek wrote:
> Hi!
> 
> > +/* min/typical/max system clock (xclk) frequencies */
> > +#define OV5640_XCLK_MIN  6000000
> > +#define OV5640_XCLK_MAX 24000000
> > +
> > +/*
> > + * FIXME: there is no subdev API to set the MIPI CSI-2
> > + * virtual channel yet, so this is hardcoded for now.
> > + */
> > +#define OV5640_MIPI_VC	1
> 
> Can the FIXME be fixed?

Yes, but it's quite a bit of work. It makes sense to use a static virtual
channel for now. A patchset which is however incomplete can be found here:

<URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=vc>

For what it's worth, all other devices use virtual channel zero for image
data and so should this one.

> 
> > +/*
> > + * image size under 1280 * 960 are SUBSAMPLING
> 
> -> Image
> 
> > + * image size upper 1280 * 960 are SCALING
> 
> above?
> 
> > +/*
> > + * FIXME: all of these register tables are likely filled with
> > + * entries that set the register to their power-on default values,
> > + * and which are otherwise not touched by this driver. Those entries
> > + * should be identified and removed to speed register load time
> > + * over i2c.
> > + */
> 
> load->loading? Can the FIXME be fixed?
> 
> > +	/* Auto/manual exposure */
> > +	ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
> > +						 V4L2_CID_EXPOSURE_AUTO,
> > +						 V4L2_EXPOSURE_MANUAL, 0,
> > +						 V4L2_EXPOSURE_AUTO);
> > +	ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
> > +					    V4L2_CID_EXPOSURE_ABSOLUTE,
> > +					    0, 65535, 1, 0);
> 
> Is exposure_absolute supposed to be in microseconds...?

Yes. OTOH V4L2_CID_EXPOSURE has no defined unit, so it's a better fit IMO.
Way more drivers appear to be using EXPOSURE than EXPOSURE_ABSOLUTE, too.

Ideally we should have only one control for exposure.

-- 
Regards,

Sakari Ailus
e-mail: sakari.ailus at iki.fi	XMPP: sailus at retiisi.org.uk