[PATCH 28/38] ARM: dts: iwg20m: Add MMCIF0 support

[Simon Horman]

From: Chris Paterson <chris.paterson2 at renesas.com>

Define the iwg20m board dependent part of the MMCIF0 device node.

Signed-off-by: Chris Paterson <chris.paterson2 at renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 001ca9144f4b..f78dbc542a82 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -22,8 +22,34 @@
 		device_type = "memory";
 		reg = <2 0x00000000 0 0x20000000>;
 	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
+
+&pfc {
+	mmcif0_pins: mmc {
+		groups = "mmc_data8_b", "mmc_ctrl";
+		function = "mmc";
+	};
+};
+
+&mmcif0 {
+		pinctrl-0 = <&mmcif0_pins>;
+		pinctrl-names = "default";
+
+		vmmc-supply = <&reg_3p3v>;
+		bus-width = <8>;
+		non-removable;
+		status = "okay";
+};
-- 
2.1.4