[PATCH v2 1/4] drm/bridge: dw-hdmi: add cec notifier support
Russell King
rmk+kernel at armlinux.org.uk
Mon Jul 31 07:29:41 PDT 2017
Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
drivers/gpu/drm/bridge/synopsys/Kconfig | 1 +
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index 53e78d092d18..351db000599a 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -2,6 +2,7 @@ config DRM_DW_HDMI
tristate
select DRM_KMS_HELPER
select REGMAP_MMIO
+ select CEC_CORE if CEC_NOTIFIER
config DRM_DW_HDMI_AHB_AUDIO
tristate "Synopsys Designware AHB Audio interface"
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ead11242c4b9..82e55ee8e4fa 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -36,7 +36,10 @@
#include "dw-hdmi.h"
#include "dw-hdmi-audio.h"
+#include <media/cec-notifier.h>
+
#define DDC_SEGMENT_ADDR 0x30
+
#define HDMI_EDID_LEN 512
enum hdmi_datamap {
@@ -175,6 +178,8 @@ struct dw_hdmi {
struct regmap *regm;
void (*enable_audio)(struct dw_hdmi *hdmi);
void (*disable_audio)(struct dw_hdmi *hdmi);
+
+ struct cec_notifier *cec_notifier;
};
#define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
drm_mode_connector_update_edid_property(connector, edid);
+ cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
ret = drm_add_edid_modes(connector, edid);
/* Store the ELD */
drm_edid_to_eld(connector, edid);
@@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
* ask the source to re-read the EDID.
*/
if (intr_stat &
- (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))
+ (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
__dw_hdmi_setup_rx_sense(hdmi,
phy_stat & HDMI_PHY_HPD,
phy_stat & HDMI_PHY_RX_SENSE);
+ if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
+ cec_notifier_set_phys_addr(hdmi->cec_notifier,
+ CEC_PHYS_ADDR_INVALID);
+ }
+
if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
dev_dbg(hdmi->dev, "EVENT=%s\n",
phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
@@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
if (ret)
goto err_iahb;
+ hdmi->cec_notifier = cec_notifier_get(dev);
+ if (!hdmi->cec_notifier) {
+ ret = -ENOMEM;
+ goto err_iahb;
+ }
+
/*
* To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
* N and cts values before enabling phy
@@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->ddc = NULL;
}
+ if (hdmi->cec_notifier)
+ cec_notifier_put(hdmi->cec_notifier);
+
clk_disable_unprepare(hdmi->iahb_clk);
err_isfr:
clk_disable_unprepare(hdmi->isfr_clk);
--
2.7.4
More information about the linux-arm-kernel
mailing list