[PATCH v2] arm64: dts: cavium: fix PCI bus dtc warnings

[Jayachandran C]

On Wed, Jul 26, 2017 at 04:09:43PM -0500, Rob Herring wrote:
> dtc recently added PCI bus checks. Fix these warnings:
> 
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (pci_bridge): Node /pci missing bus-range for PCI bridge
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (unit_address_vs_reg): Node /pci has a reg or ranges property, but no unit name
> 
> Signed-off-by: Rob Herring <robh at kernel.org>
> Cc: Jayachandran C <jnair at caviumnetworks.com>
> ---
> v2:
> - Reapply broadcom vulkan changes to thunder2.
> 
>  arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> index 4220fbdcb24a..ea50c1320bf7 100644
> --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> @@ -98,7 +98,7 @@
>  		clock-output-names = "clk125mhz";
>  	};
>  
> -	pci {
> +	pci at 30000000 {
>  		compatible = "pci-host-ecam-generic";
>  		device_type = "pci";
>  		#interrupt-cells = <1>;
> @@ -118,6 +118,7 @@
>  		ranges =
>  		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
>  		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
> +		bus-range = <0 0xff>;
>  		interrupt-map-mask = <0 0 0 7>;
>  		interrupt-map =
>  		      /* addr  pin  ic   icaddr  icintr */

Thanks for fixing this up.

Acked-by: Jayachandran C <jnair at caviumnetworks.com>

The unit name issue is there with memory node on thunder2-99xx.dts as well, I can fix
this up if you are not planning to.

JC