[PATCH] ARM: dts: stm32: reorder stm32h743 nodes

[Alexandre Torgue]

On 07/20/2017 04:17 PM, Alexandre Torgue wrote:
> Reorder nodes to keep coherency with others platforms (stm32f4/stm32f7).
> Nodes are ordered following base address.
> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue at st.com>
> 
> diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
> index 36a99db..343bf4a 100644
> --- a/arch/arm/boot/dts/stm32h743.dtsi
> +++ b/arch/arm/boot/dts/stm32h743.dtsi
> @@ -59,13 +59,11 @@
>   	};
>   
>   	soc {
> -		usart1: serial at 40011000 {
> -			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> -			reg = <0x40011000 0x400>;
> -			interrupts = <37>;
> -			status = "disabled";
> +		timer5: timer at 40000c00 {
> +			compatible = "st,stm32-timer";
> +			reg = <0x40000c00 0x400>;
> +			interrupts = <50>;
>   			clocks = <&timer_clk>;
> -
>   		};
>   
>   		usart2: serial at 40004400 {
> @@ -76,11 +74,13 @@
>   			clocks = <&timer_clk>;
>   		};
>   
> -		timer5: timer at 40000c00 {
> -			compatible = "st,stm32-timer";
> -			reg = <0x40000c00 0x400>;
> -			interrupts = <50>;
> +		usart1: serial at 40011000 {
> +			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> +			reg = <0x40011000 0x400>;
> +			interrupts = <37>;
> +			status = "disabled";
>   			clocks = <&timer_clk>;
> +
>   		};
>   	};
>   };
> 
Applied on stm32-dt-for-v4.14 branch.