[PATCH v3 1/2] gpio: davinci: Add keystone-k2g compatible

[Keerthy]

On Wednesday 26 July 2017 06:30 PM, Suman Anna wrote:
> Hi Keerthy,
> 
> On 07/26/2017 01:45 AM, Keerthy wrote:
>> The patch adds keystone-k2g compatible, specific properties and
>> an example.
> 
> Please update patch header to "dt-bindings: gpio: davinci: ...."

Okay

> 
>>
>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>> ---
>>
>> Changes in v3:
>>
>>   * Added details about family of SoCs corresponding to compatibles.
>>
>>  .../devicetree/bindings/gpio/gpio-davinci.txt      | 40 +++++++++++++++++++++-
>>  1 file changed, 39 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> index 5079ba7..fb9efee 100644
>> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> @@ -1,7 +1,10 @@
>>  Davinci/Keystone GPIO controller bindings
>>  
>>  Required Properties:
>> -- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>> +- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs 
>> +			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
>> +						66AK2E SoCs
>> +			"ti,keystone-k2g-gpio", "ti,keystone-gpio": for 66AK2G
>>  
>>  - reg: Physical base address of the controller and the size of memory mapped
>>         registers.
>> @@ -26,6 +29,17 @@ The GPIO controller also acts as an interrupt controller. It uses the default
>>  two cells specifier as described in Documentation/devicetree/bindings/
>>  interrupt-controller/interrupts.txt.
>>  
>> +Required Properties specific to keystone-k2g
> 
> Thanks for updating the binding for the clocks, but clocks are not
> specific to K2G. They also apply to other K2 SoCs. Davinci platforms do
> not have DT clocks atm, so the Davinci portion can be updated later if
> and when they get added.

Yes. I can add that information.

> 
>> +
>> +- clocks: Should contain devices input clock. The first parameter
>> +           is a handle to k2g_clks. The second parameter is the
>> +           device ID and the third parameter is the clock ID. One can
>> +           refer: http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
> 
> No need for this link here, just refer to the appropriate clock
> bindings. Some thing like the following would be better
> 
> - clocks:               Should contain the device's input clock, and
>                         should be defined as per the appropriate clock
> bindings consumer usage in,
> 
> Documentation/devicetree/bindings/clock/keystone-gate.txt
>                             for 66AK2HK/66AK2L/66AK2E SoCs or,
> 
> Documentation/devicetree/bindings/clock/ti,sci-clk.txt
>                             for 66AK2G SoCs

Okay

> 
>> +
>> +           Example: <&k2g_clks 0x001c 0x0>;
> 
> This can be dropped as well, below example already demonstrates it.

Okay

> 
>> +
>> +- clock-names: The driver expects the clock name to be "gpio";
> 
> Just say, Should be "gpio". No need of mentioning about the driver.

Okay

> 
>> +
>>  Example:
>>  
>>  gpio: gpio at 1e26000 {
>> @@ -60,3 +74,27 @@ leds {
>>  		...
>>  	};
>>  };
>> +
>> +Example for keystone-k2g:
> 
> s/keystone-k2g/66AK2G/

oops missed out here. I will correct this.

> 
>> +
>> +gpio0: gpio at 2603000 {
>> +	compatible = "ti,keystone-k2g-gpio", "ti,keystone-gpio";
>> +	reg = <0x02603000 0x100>;
>> +	gpio-controller;
>> +	#gpio-cells = <2>;
>> +	interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
>> +			<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
>> +	interrupt-controller;
>> +	#interrupt-cells = <2>;
>> +	ti,ngpio = <144>;
>> +	ti,davinci-gpio-unbanked = <0>;
>> +	clocks = <&k2g_clks 0x001b 0x0>;
>> +	clock-names = "gpio";
>> +};
>>
> 
> regards
> Suman
>