[PATCH v3 2/2] ARM: dts: keystone-k2g-evm: Add gpio nodes

Keerthy j-keerthy at ti.com
Wed Jul 26 06:29:58 PDT 2017



On Wednesday 26 July 2017 06:33 PM, Suman Anna wrote:
> Hi Keerthy,
> 
> On 07/26/2017 01:45 AM, Keerthy wrote:
>> 66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
>> functional( 9 banks with 16 gpios = 144). The second instance has
> 
> nit, space before ( and not after.

Sure.

> 
>> only the GPIO0:GPIO67 functional and rest are marked reserved.
> 
> s/keystone-k2g-evm/keystone-k2g/ on the patch header please, otherwise
> this patch looks good.

Okay.

> 
>>
>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>> ---
>>
>> The patch depends on the below series:
>>
>> http://marc.info/?l=linux-arm-kernel&m=150034845427555&w=2
>> http://marc.info/?l=linux-arm-kernel&m=150034856627618&w=2
> 
> FYI, these are already picked up my Santosh and are part of linux-next.

Yes saw that now. I will send v4.

> 
> regards
> Suman
> 
>>
>> Driver patches related are already posted:
>>
>> https://www.spinics.net/lists/arm-kernel/msg594862.html
>>
>> Changes in v2:
>>
>>   * Split the documentation part into a separate patch.
>>
>>  arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++
>>  1 file changed, 42 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
>> index bf4d1fa..f9ff299 100644
>> --- a/arch/arm/boot/dts/keystone-k2g.dtsi
>> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi
>> @@ -15,6 +15,7 @@
>>  
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  #include <dt-bindings/pinctrl/keystone.h>
>> +#include <dt-bindings/gpio/gpio.h>
>>  
>>  / {
>>  	compatible = "ti,k2g","ti,keystone";
>> @@ -168,5 +169,46 @@
>>  				#reset-cells = <2>;
>>  			};
>>  		};
>> +
>> +		gpio0: gpio at 2603000 {
>> +			compatible = "ti,keystone-k2g-gpio", "ti,keystone-gpio";
>> +			reg = <0x02603000 0x100>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			ti,ngpio = <144>;
>> +			ti,davinci-gpio-unbanked = <0>;
>> +			clocks = <&k2g_clks 0x001b 0x0>;
>> +			clock-names = "gpio";
>> +		};
>> +
>> +		gpio1: gpio at 260a000 {
>> +			compatible = "ti,keystone-k2g-gpio", "ti,keystone-gpio";
>> +			reg = <0x0260a000 0x100>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			ti,ngpio = <68>;
>> +			ti,davinci-gpio-unbanked = <0>;
>> +			clocks = <&k2g_clks 0x001c 0x0>;
>> +			clock-names = "gpio";
>> +		};
>>  	};
>>  };
>>
> 



More information about the linux-arm-kernel mailing list