[PATCH v4 2/9] dt-bindings: clk: at91: add audio plls to the compatible list

[Nicolas Ferre]

On 25/07/2017 at 09:37, Quentin Schulz wrote:
> This new clock driver set allows to have a fractional divided clock that
> would generate a precise clock particularly suitable for audio
> applications.
> 
> The main audio pll clock has two children clocks: one that is connected
> to the PMC, the other that can directly drive a pad. As these two routes
> have different enable bits and different dividers and divider formulas,
> they are handled by two different drivers.
> 
> This adds the audio plls (frac, pad and pmc) to the compatible list of
> at91 clocks in DT binding.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
> Acked-by: Rob Herring <robh at kernel.org>
> Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>

Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

> ---
>  Documentation/devicetree/bindings/clock/at91-clock.txt | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index 5f3ad65..51c259a 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -81,6 +81,16 @@ Required properties:
>  	"atmel,sama5d2-clk-generated":
>  		at91 generated clock
>  
> +	"atmel,sama5d2-clk-audio-pll-frac":
> +		at91 audio fractional pll
> +
> +	"atmel,sama5d2-clk-audio-pll-pad":
> +		at91 audio pll CLK_AUDIO output pin
> +
> +	"atmel,sama5d2-clk-audio-pll-pmc"
> +		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
> +		and can be used by peripheral clock or generic clock
> +
>  Required properties for SCKC node:
>  - reg : defines the IO memory reserved for the SCKC.
>  - #size-cells : shall be 0 (reg is used to encode clk id).
> 


-- 
Nicolas Ferre