[PATCH] ARM: dts: imx6qdl-gw5xxx: Remove the 'uart-has-rtscts' property

[Shawn Guo]

On Sat, Jul 15, 2017 at 10:06:25AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> The 'uart-has-rtscts' property should be used when the board exposes the
> native RTS and CTS UART pins.
> 
> On the imx6qdl-gw5xxx boards such pins are not used, so remove the
> 'uart-has-rtscts' property to make the hardware description correct.
> 
> Documentation/devicetree/bindings/serial/serial.txt states that
> 'uart-has-rtscts' and 'rts-gpios' properties are mutually exclusive.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied, thanks.