[PATCH 0/3] Add ethernet0 alias for several A64 boards

[icenowy at aosc.io]

在 2017-07-24 15:58，Maxime Ripard 写道：
> On Sat, Jul 22, 2017 at 10:28:49AM +0800, Icenowy Zheng wrote:
>> Allwinner A64 SoC has an EMAC which is used to provide Ethernet
>> function on several boards.
>> 
>> The EMAC itself doesn't have a fixed MAC address, but the sunxi
>> mainline U-Boot have the ability to generate one based on the eFUSE
>> SID in the chip, and add the generated MAC address to the device
>> tree when booting.
>> 
>> The MAC address setting step is based on the device tree's aliases,
>> and device tree nodes prefixed "ethernet" will get the MAC address
>> added. However, in several A64 boards' device tree, the alias is not
>> set up, so that the U-Boot won't set the MAC address.
>> 
>> Add the ethernet0 aliases to these boards.
>> 
>> I hope this patchset can be queued in 4.13, otherwise 4.13 kernels
>> won't get non-volatile MAC addresses, and will use random ones
>> instead, which is annoying to many users.
>> 
>> Icenowy Zheng (3):
>>   arm64: allwinner: a64: add ethernet0 alias for BPi M64 EMAC node
>>   arm64: allwinner: a64: add ethernet0 alias for Pine64 EMAC node
>>   arm64: allwinner: a64: add ethernet0 alias for SoPine EMAC node
> 
> Applied all three, thanks!

Sorry, but could you queue them to 4.13?

Otherwise 4.13 kernel release will have annoying random MAC problem,
which heavily affects headless usages.

> Maxime
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel