[PATCH] cpufreq: dt: Don't use generic platdev driver for tango

[Rafael J. Wysocki]

On Wednesday, July 19, 2017 12:06:42 PM Viresh Kumar wrote:
> On 18-07-17, 18:48, Marc Gonzalez wrote:
> > On tango platforms, firmware configures the CPU clock, and Linux is
> > then only allowed to use the cpu_clk_divider to change the frequency.
> > Build the OPP table dynamically at init, in order to support whatever
> > firmware throws at us.
> > 
> > Signed-off-by: Marc Gonzalez <marc_gonzalez at sigmadesigns.com>
> > ---
> >  arch/arm/boot/dts/tango4-smp8758.dtsi |  1 -
> >  drivers/cpufreq/Kconfig.arm           |  5 +++++
> >  drivers/cpufreq/Makefile              |  1 +
> >  drivers/cpufreq/cpufreq-dt-platdev.c  |  2 --
> >  drivers/cpufreq/tango-cpufreq.c       | 38 +++++++++++++++++++++++++++++++++++
> >  5 files changed, 44 insertions(+), 3 deletions(-)
> >  create mode 100644 drivers/cpufreq/tango-cpufreq.c
> > 
> > diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
> > index d2e65c46bcc7..eca33d568690 100644
> > --- a/arch/arm/boot/dts/tango4-smp8758.dtsi
> > +++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
> > @@ -13,7 +13,6 @@
> >  			reg = <0>;
> >  			clocks = <&clkgen CPU_CLK>;
> >  			clock-latency = <1>;
> > -			operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>;
> >  		};
> >  
> >  		cpu1: cpu at 1 {
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index 2011fec2d6ad..ea9ba00091bb 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -242,6 +242,11 @@ config ARM_STI_CPUFREQ
> >  	  this config option if you wish to add CPUFreq support for STi based
> >  	  SoCs.
> >  
> > +config ARM_TANGO_CPUFREQ
> > +	bool
> > +	depends on CPUFREQ_DT && ARCH_TANGO
> > +	default y
> > +
> >  config ARM_TEGRA20_CPUFREQ
> >  	bool "Tegra20 CPUFreq support"
> >  	depends on ARCH_TEGRA
> > diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> > index ab3a42cd29ef..bb9841f57787 100644
> > --- a/drivers/cpufreq/Makefile
> > +++ b/drivers/cpufreq/Makefile
> > @@ -75,6 +75,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
> >  obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
> >  obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
> >  obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
> > +obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
> >  obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
> >  obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
> >  obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
> > diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> > index 1c262923fe58..6cbe77765f46 100644
> > --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> > +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> > @@ -80,8 +80,6 @@ static const struct of_device_id machines[] __initconst = {
> >  	{ .compatible = "rockchip,rk3368", },
> >  	{ .compatible = "rockchip,rk3399", },
> >  
> > -	{ .compatible = "sigma,tango4" },
> > -
> >  	{ .compatible = "socionext,uniphier-pro5", },
> >  	{ .compatible = "socionext,uniphier-pxs2", },
> >  	{ .compatible = "socionext,uniphier-ld6b", },
> > diff --git a/drivers/cpufreq/tango-cpufreq.c b/drivers/cpufreq/tango-cpufreq.c
> > new file mode 100644
> > index 000000000000..89a7f860bfe8
> > --- /dev/null
> > +++ b/drivers/cpufreq/tango-cpufreq.c
> > @@ -0,0 +1,38 @@
> > +#include <linux/of.h>
> > +#include <linux/cpu.h>
> > +#include <linux/clk.h>
> > +#include <linux/pm_opp.h>
> > +#include <linux/platform_device.h>
> > +
> > +static const struct of_device_id machines[] __initconst = {
> > +	{ .compatible = "sigma,tango4" },
> > +	{ /* sentinel */ }
> > +};
> > +
> > +static int __init tango_cpufreq_init(void)
> > +{
> > +	struct device *cpu_dev = get_cpu_device(0);
> > +	unsigned long max_freq;
> > +	struct clk *cpu_clk;
> > +	void *res;
> > +
> > +	if (!of_match_node(machines, of_root))
> > +		return -ENODEV;
> > +
> > +	cpu_clk = clk_get(cpu_dev, NULL);
> > +	if (IS_ERR(cpu_clk))
> > +		return -ENODEV;
> > +
> > +	max_freq = clk_get_rate(cpu_clk);
> > +
> > +	dev_pm_opp_add(cpu_dev, max_freq / 1, 0);
> > +	dev_pm_opp_add(cpu_dev, max_freq / 2, 0);
> > +	dev_pm_opp_add(cpu_dev, max_freq / 3, 0);
> > +	dev_pm_opp_add(cpu_dev, max_freq / 5, 0);
> > +	dev_pm_opp_add(cpu_dev, max_freq / 9, 0);
> > +
> > +	res = platform_device_register_data(NULL, "cpufreq-dt", -1, NULL, 0);
> > +
> > +	return PTR_ERR_OR_ZERO(res);
> > +}
> > +device_initcall(tango_cpufreq_init);
> 
> Acked-by: Viresh Kumar <viresh.kumar at linaro.org>

Patch applied, thanks!