[PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Gary Bisson]

Hi Fabio,

On Mon, Jul 24, 2017 at 2:49 PM, Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Gary,
>
> On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
> <gary.bisson at boundarydevices.com> wrote:
>
> > +
> > +               reg_usb_h1_vbus: regulator at 7 {
> > +                       compatible = "regulator-fixed";
> > +                       reg = <7>;
> > +                       pinctrl-names = "default";
> > +                       pinctrl-0 = <&pinctrl_usbh1>;
> > +                       regulator-name = "usb_h1_vbus";
> > +                       regulator-min-microvolt = <3300000>;
> > +                       regulator-max-microvolt = <3300000>;
> > +                       gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> > +                       enable-active-high;
> > +                       regulator-always-on;
>
> As this regulator is controlled via GPIO I believe you should remove
> the ' regulator-always-on' property.
>
> Same applies to 2/2/

Good catch, I'll send a v2 right away.

Thanks,
Gary