[linux-sunxi][PATCH] ARM: dts: sun7i: Add I2S0 pinctrl settings

[Code Kipper]

No...I've only got an Olimex SOM EVB which exposes these pins on a
GPIO header (like many of the dev boards). Just thought if we included
them in the dtsi then adding overlays for i2s devices would be
simplified.
BR,
CK

On 24 July 2017 at 10:20, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Hi Marcus,
>
> On Sat, Jul 22, 2017 at 08:43:13AM +0200, codekipper at gmail.com wrote:
>> From: Marcus Cooper <codekipper at gmail.com>
>>
>> The A20 SoC has a couple of i2s blocks. This patch adds
>> the pinctrl settings for block i2s0.
>>
>> Signed-off-by: Marcus Cooper <codekipper at gmail.com>
>
> We're not adding pin groups that are not used by anyone. If you have a
> board using them, please send the DT for that board too.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com