[PATCH 1/3] iio: adc: stm32: fix common clock rate

[Jonathan Cameron]

On Tue, 18 Jul 2017 14:35:30 +0200
Fabrice Gasnier <fabrice.gasnier at st.com> wrote:

> Fixes commit 95e339b6e85d ("iio: adc: stm32: add support for STM32H7")
> 
> Fix common clock rate used then by stm32-adc sub-devices: take common
> prescaler into account.
> Fix ADC max clock rate on STM32H7 (fADC from datasheet)
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
Patch itself is fine, but the description could do with
information on what the result of this being wrong is.

I have no idea if this is a patch I should be sending upstream
asap or should hold for the next merge window.

Thanks,

Jonathan
> ---
>  drivers/iio/adc/stm32-adc-core.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> index e09233b..6096763 100644
> --- a/drivers/iio/adc/stm32-adc-core.c
> +++ b/drivers/iio/adc/stm32-adc-core.c
> @@ -64,7 +64,7 @@
>  #define STM32H7_CKMODE_MASK		GENMASK(17, 16)
>  
>  /* STM32 H7 maximum analog clock rate (from datasheet) */
> -#define STM32H7_ADC_MAX_CLK_RATE	72000000
> +#define STM32H7_ADC_MAX_CLK_RATE	36000000
>  
>  /**
>   * stm32_adc_common_regs - stm32 common registers, compatible dependent data
> @@ -148,14 +148,14 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
>  		return -EINVAL;
>  	}
>  
> -	priv->common.rate = rate;
> +	priv->common.rate = rate / stm32f4_pclk_div[i];
>  	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
>  	val &= ~STM32F4_ADC_ADCPRE_MASK;
>  	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
>  	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
>  
>  	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
> -		rate / (stm32f4_pclk_div[i] * 1000));
> +		priv->common.rate / 1000);
>  
>  	return 0;
>  }
> @@ -250,7 +250,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  
>  out:
>  	/* rate used later by each ADC instance to control BOOST mode */
> -	priv->common.rate = rate;
> +	priv->common.rate = rate / div;
>  
>  	/* Set common clock mode and prescaler */
>  	val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR);
> @@ -260,7 +260,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
>  	writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR);
>  
>  	dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n",
> -		ckmode ? "bus" : "adc", div, rate / (div * 1000));
> +		ckmode ? "bus" : "adc", div, priv->common.rate / 1000);
>  
>  	return 0;
>  }