[PATCH] irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES

Marc Zyngier marc.zyngier at arm.com
Fri Jul 21 04:20:08 PDT 2017


On 21/07/17 11:06, Hanjun Guo wrote:
> On 2017/7/21 17:51, Hanjun Guo wrote:
>> From: Hanjun Guo <hanjun.guo at linaro.org>
>>
>> When running 4.13-rc1 on top of D05, I got the boot log:
>>
>> [    0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> ITS 1 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> ITS 2 -> Node 0
>> [    0.000000] SRAT: PXM 1 -> ITS 3 -> Node 1
>> [    0.000000] SRAT: ITS affinity exceeding max count[4]
>>
>> This is wrong on D05 as we have 8 ITSes with 4 NUMA nodes.

I'm not seeing this on the D05 I have access to. Actually, I'm not
seeing any data related to SRAT and the ITS. Is that a different firmware?

>>
>> So dynamically alloc the memory needed instead of using
>> its_srat_maps[MAX_NUMNODES], which count the number of
>> ITS entry(ies) in SRAT and alloc its_srat_maps as needed,
>> then build the mapping of numa node to ITS ID.
>>
>> After doing this, I got what I wanted:
>>
>> [    0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> ITS 1 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> ITS 2 -> Node 0
>> [    0.000000] SRAT: PXM 1 -> ITS 3 -> Node 1
>> [    0.000000] SRAT: PXM 2 -> ITS 4 -> Node 2
>> [    0.000000] SRAT: PXM 2 -> ITS 5 -> Node 2
>> [    0.000000] SRAT: PXM 2 -> ITS 6 -> Node 2
>> [    0.000000] SRAT: PXM 3 -> ITS 7 -> Node 3
>>
>> Fixes: dbd2b8267233 ("irqchip/gic-v3-its: Add ACPI NUMA node mapping")
>> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
>> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni at cavium.com>
>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
>> Cc: Marc Zyngier <marc.zyngier at arm.com>
>> ---
>>  drivers/irqchip/irq-gic-v3-its.c | 28 +++++++++++++++++++++-------
>>  1 file changed, 21 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
>> index 3ccdf76..fb1c090 100644
>> --- a/drivers/irqchip/irq-gic-v3-its.c
>> +++ b/drivers/irqchip/irq-gic-v3-its.c
>> @@ -1847,7 +1847,7 @@ struct its_srat_map {
>>  	u32	its_id;
>>  };
>>  
>> -static struct its_srat_map its_srat_maps[MAX_NUMNODES] __initdata;
>> +static struct its_srat_map *its_srat_maps __initdata;
>>  static int its_in_srat __initdata;
>>  
>>  static int __init acpi_get_its_numa_node(u32 its_id)
>> @@ -1861,6 +1861,12 @@ static int __init acpi_get_its_numa_node(u32 its_id)
>>  	return NUMA_NO_NODE;
>>  }
> 
> Oops, need to check if the its_srat_maps valid or not here, please
> comment on what else I'm missing or wrong, then I will prepare another
> version.

Please post a patch that has all of the fixes, and I'll review that.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...



More information about the linux-arm-kernel mailing list