[PATCH v2 03/10] clk: sunxi-ng: a83t: Support new timing mode for mmc2 clock

Chen-Yu Tsai wens at csie.org
Wed Jul 19 20:44:45 PDT 2017


The MMC2 clock supports a new timing mode. When the new mode is active,
the output clock rate is halved.

This patch sets the feature flag for the new timing mode, and adds
a pre-divider based on the mode bit.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index 947f9f6e05d2..c5656e4f2a38 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -418,14 +418,13 @@ static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1-sample", "mmc1",
 static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1-output", "mmc1",
 		       0x08c, 8, 3, 0);
 
-/* TODO Support MMC2 clock's new timing mode. */
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents,
-				  0x090,
-				  0, 4,		/* M */
-				  16, 2,	/* P */
-				  24, 2,	/* mux */
-				  BIT(31),	/* gate */
-				  0);
+static SUNXI_CCU_MP_MMC_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents,
+				      0x090,
+				      0, 4,	/* M */
+				      16, 2,	/* P */
+				      24, 2,	/* mux */
+				      BIT(31),	/* gate */
+				      CLK_GET_RATE_NOCACHE);
 
 static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2-sample", "mmc2",
 		       0x090, 20, 3, 0);
-- 
2.13.2




More information about the linux-arm-kernel mailing list