[PATCH v5 0/2] Add Basic SoC support for MT7622

[Sean Wang]

Hi, Matthias

just a gentle ping on this 

	Sean


On Sat, 2017-06-17 at 01:06 +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang at mediatek.com>
> 
> Changes since v4:
> - redefine the two dummy clocks with the correct frequency
>   which is 25MHz and 280MHz respectively.
> 
> Changes since v3:
> - get rid of those accepted patches
> - rebased to branch v4.12-next/dts64 in Matthias' tree
> - fixed uart node in dts with two clocks as described in bindings documentation
> 
> Changes since v2:
> - merge back required basic clock nodes into the .dtsi file
> - update the property of interrupts in timer nodes with 2 CPUs
> 
> Changes since v1:
> - update SPDX-License-Identifier
> - remove next-level-cache property since cache geometry detection was removed since 4.12
> 
> This patch set adds basic SoC support for MediaTek MT7622
> SoC based on 4.12-rc1.
> 
> Sean Wang (2):
>   arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file
>   arm64: dts: mt7622: add dts file for MT7622 reference board variant 1
> 
>  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>  arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts |  27 +++++++
>  arch/arm64/boot/dts/mediatek/mt7622.dtsi     | 110 +++++++++++++++++++++++++++
>  3 files changed, 138 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
>