[linux-sunxi] [PATCH v4 4/5] ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu

[Ondřej Jirman]

Hi,

Icenowy Zheng píše v Út 04. 04. 2017 v 17:50 +0800:
> From: Icenowy Zheng <icenowy at aosc.xyz>
> 
> Now we have driver for the PRCM CCU, switch to use it instead of
> old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi .
> 
> The mux 3 of R_CCU is still the internal oscillator, which is said to be
> 16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two
> H3 boards and one H5 board.

There's issue with the new r_ccu that breaks r_i2c. (no devices can be
found on the bus). Reverting this patch fixes the issue with the I2C
controller. (everything else being the same) 

Here's the code I'm using: https://github.com/megous/linux/commits/oran
ge-pi-4.12

The last commit is the revert.

The issue manifests itself by non-working DVFS, because kernel lacks
access to SY8106A regulator, because r_i2c doesn't work with sunxi-ng
clock driver (sun8i-r).

Relevant difference in registers between working/non-working state is
just this (diff -u):

 0x01f02400 = 0x00000000 
 0x01f02404 = 0x00000000 
-0x01f02408 = 0x00000091 
+0x01f02408 = 0x00000095 DATA register inisde the I2C controller
 0x01f0240c = 0x00000044 
 0x01f02410 = 0x000000f8 
-0x01f02414 = 0x00000059 
+0x01f02414 = 0x00000000 CLOCK setup register inside the I2C controller
 0x01f02418 = 0x00000000 
 0x01f0241c = 0x00000000 
 0x01f02420 = 0x0000003a 

It looks like the new sunxi-ng clock driver causes the I2C driver to
not correctly configure the CLOCK register. I don't know why and I'm
not sure how to deal with this. Any ideas what can I do next?

thank you and regards,
  o.

> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
> ---
> Changes in v4:
> - Temporarily dropped the CCU headers.
> Changes in v3:
> - Change osc32000 to iosc.
> 
>  arch/arm/boot/dts/sunxi-h3-h5.dtsi | 45 ++++++++++++--------------------------
>  1 file changed, 14 insertions(+), 31 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 6640ebfa6419..1aeeacb3a884 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -68,31 +68,12 @@
>  			clock-output-names = "osc32k";
>  		};
>  
> -		apb0: apb0_clk {
> -			compatible = "fixed-factor-clock";
> +		iosc: internal-osc-clk {
>  			#clock-cells = <0>;
> -			clock-div = <1>;
> -			clock-mult = <1>;
> -			clocks = <&osc24M>;
> -			clock-output-names = "apb0";
> -		};
> -
> -		apb0_gates: clk at 01f01428 {
> -			compatible = "allwinner,sun8i-h3-apb0-gates-clk",
> -				     "allwinner,sun4i-a10-gates-clk";
> -			reg = <0x01f01428 0x4>;
> -			#clock-cells = <1>;
> -			clocks = <&apb0>;
> -			clock-indices = <0>, <1>;
> -			clock-output-names = "apb0_pio", "apb0_ir";
> -		};
> -
> -		ir_clk: ir_clk at 01f01454 {
> -			compatible = "allwinner,sun4i-a10-mod0-clk";
> -			reg = <0x01f01454 0x4>;
> -			#clock-cells = <0>;
> -			clocks = <&osc32k>, <&osc24M>;
> -			clock-output-names = "ir";
> +			compatible = "fixed-clock";
> +			clock-frequency = <16000000>;
> +			clock-accuracy = <300000000>;
> +			clock-output-names = "iosc";
>  		};
>  	};
>  
> @@ -576,9 +557,12 @@
>  				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> -		apb0_reset: reset at 01f014b0 {
> -			reg = <0x01f014b0 0x4>;
> -			compatible = "allwinner,sun6i-a31-clock-reset";
> +		r_ccu: clock at 1f01400 {
> +			compatible = "allwinner,sun50i-a64-r-ccu";
> +			reg = <0x01f01400 0x100>;
> +			clocks = <&osc24M>, <&osc32k>, <&iosc>;
> +			clock-names = "hosc", "losc", "iosc";
> +			#clock-cells = <1>;
>  			#reset-cells = <1>;
>  		};
>  
> @@ -589,9 +573,9 @@
>  
>  		ir: ir at 01f02000 {
>  			compatible = "allwinner,sun5i-a13-ir";
> -			clocks = <&apb0_gates 1>, <&ir_clk>;
> +			clocks = <&r_ccu 4>, <&r_ccu 11>;
>  			clock-names = "apb", "ir";
> -			resets = <&apb0_reset 1>;
> +			resets = <&r_ccu 0>;
>  			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>  			reg = <0x01f02000 0x40>;
>  			status = "disabled";
> @@ -601,9 +585,8 @@
>  			compatible = "allwinner,sun8i-h3-r-pinctrl";
>  			reg = <0x01f02c00 0x400>;
>  			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
> +			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
>  			clock-names = "apb", "hosc", "losc";
> -			resets = <&apb0_reset 0>;
>  			gpio-controller;
>  			#gpio-cells = <3>;
>  			interrupt-controller;
> -- 
> 2.12.2
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 850 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170720/c8772b79/attachment-0001.sig>