[PATCH 5/5] arm: allwinner: a64: drop vcc3v3 and vcc1v8 dummy regulators for SoPine
Icenowy Zheng
icenowy at aosc.io
Wed Jul 19 09:10:19 PDT 2017
The device tree of SoPine SoM and its baseboard used to contain two
dummy regulators: vcc3v3 and vcc1v8.
As proper AXP803 regulator support is added, drop the dummy regulators,
and use the correct ones.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 11 ++---------
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 11 +----------
2 files changed, 3 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 834a5d249bb2..58346381e486 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -59,13 +59,6 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
- reg_vcc1v8: vcc1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
};
&ehci0 {
@@ -95,8 +88,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc1v8>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 7adfd013fd60..a7eb9c197023 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,19 +45,10 @@
#include "sun50i-a64.dtsi"
-/ {
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;
--
2.13.0
More information about the linux-arm-kernel
mailing list