[PATCH v3 3/6] perf: hisi: Add support for HiSilicon SoC L3C PMU driver
Jonathan Cameron
Jonathan.Cameron at huawei.com
Wed Jul 19 02:28:41 PDT 2017
On Tue, 18 Jul 2017 15:59:56 +0800
Shaokun Zhang <zhangshaokun at hisilicon.com> wrote:
> This patch adds support for L3C PMU driver in HiSilicon SoC chip, Each
> L3C has own control, counter and interrupt registers and is an separate
> PMU. For each L3C PMU, it has 8-programable counters and supports 0x60
> events, event code is 8-bits and every counter is free-running.
> Interrupt is supported to handle counter (48-bits) overflow.
>
> Signed-off-by: Shaokun Zhang <zhangshaokun at hisilicon.com>
> Signed-off-by: Anurup M <anurup.m at huawei.com>
Hi Shaokun,
A few minor points inline.
Thanks,
Jonathan
> ---
> drivers/perf/hisilicon/Makefile | 2 +-
> drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 556 +++++++++++++++++++++++++++
> include/linux/cpuhotplug.h | 1 +
> 3 files changed, 558 insertions(+), 1 deletion(-)
> create mode 100644 drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
>
> diff --git a/drivers/perf/hisilicon/Makefile b/drivers/perf/hisilicon/Makefile
> index 2783bb3..4a3d3e6 100644
> --- a/drivers/perf/hisilicon/Makefile
> +++ b/drivers/perf/hisilicon/Makefile
> @@ -1 +1 @@
> -obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o
> +obj-$(CONFIG_HISI_PMU) += hisi_uncore_pmu.o hisi_uncore_l3c_pmu.o
> diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
> new file mode 100644
> index 0000000..d430508
> --- /dev/null
> +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
> @@ -0,0 +1,556 @@
> +/*
> + * HiSilicon SoC L3C uncore Hardware event counters support
> + *
> + * Copyright (C) 2017 Hisilicon Limited
> + * Author: Anurup M <anurup.m at huawei.com>
> + * Shaokun Zhang <zhangshaokun at hisilicon.com>
> + *
> + * This code is based on the uncore PMUs like arm-cci and arm-ccn.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
Missed this on previous but putting full gpl text in is not normally done any
more.
> + */
> +#include <linux/acpi.h>
> +#include <linux/bitmap.h>
Not immediately seeing any bitmaps in use in here.
(I may well have missed something though!)
> +#include <linux/cpuhotplug.h>
> +#include <linux/module.h>
> +#include <linux/perf_event.h>
> +#include <linux/topology.h>
> +#include "hisi_uncore_pmu.h"
<snip>
> +
> +/* Check if the CPU belongs to the SCCL and CCL of PMU */
> +static bool hisi_l3c_is_cpu_in_ccl(struct hisi_pmu *l3c_pmu)
> +{
> + u32 ccl_id, scl_id;
> +
> + /* Read Super CPU cluster ID from CPU MPIDR_EL1 */
> + hisi_read_scl_and_ccl_id(&scl_id, &ccl_id);
> +
> + /* Check if the CPU match with the SCCL and CCL */
> + if (scl_id != l3c_pmu->scl_id)
> + return false;
> + if (ccl_id != l3c_pmu->ccl_id)
> + return false;
> +
> + /* Return true if matched */
I think the name of the function makes this clear enough to
not need a comment here, but up to you.
> + return true;
> +}
> +
> +static int hisi_l3c_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> + struct hisi_pmu *l3c_pmu;
> +
> + l3c_pmu = hlist_entry_safe(node, struct hisi_pmu, node);
> +
> + /* Proceed only when CPU belongs to the same SCCL and CCL */
> + if (!hisi_l3c_is_cpu_in_ccl(l3c_pmu))
> + return 0;
> +
> + /* If another CPU is already managing the CPU cluster, simply return */
> + if (!cpumask_empty(&l3c_pmu->cpus))
> + return 0;
> +
> + /* Use this CPU for event counting in the CCL */
> + cpumask_set_cpu(cpu, &l3c_pmu->cpus);
> +
> + return 0;
> +}
> +
> +static int hisi_l3c_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> + struct hisi_pmu *l3c_pmu;
> + cpumask_t ccl_online_cpus;
> + unsigned int target;
> +
> + l3c_pmu = hlist_entry_safe(node, struct hisi_pmu, node);
> +
> + /* Proceed only when CPU belongs to the same SCCL and CCL */
> + if (!hisi_l3c_is_cpu_in_ccl(l3c_pmu))
> + return 0;
> +
> + /* Proceed if this CPU is used for event counting */
> + if (!cpumask_test_cpu(cpu, &l3c_pmu->cpus))
> + return 0;
> +
> + /* Give up ownership of CCL */
> + cpumask_test_and_clear_cpu(cpu, &l3c_pmu->cpus);
> +
> + /* Any other CPU for this CCL which is still online */
> + cpumask_and(&ccl_online_cpus, cpu_coregroup_mask(cpu),
> + cpu_online_mask);
> + target = cpumask_any_but(&ccl_online_cpus, cpu);
> + if (target >= nr_cpu_ids)
> + return 0;
> +
> + perf_pmu_migrate_context(&l3c_pmu->pmu, cpu, target);
> + /* Use this CPU for event counting in the CCL */
> + cpumask_set_cpu(target, &l3c_pmu->cpus);
> +
> + return 0;
> +}
> +
> +static const struct acpi_device_id hisi_l3c_pmu_acpi_match[] = {
> + { "HISI0213", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match);
> +
> +static int hisi_l3c_pmu_init_data(struct platform_device *pdev,
> + struct hisi_pmu *l3c_pmu)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + unsigned long long id;
> + acpi_status status;
> +
> + status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_UID", NULL, &id);
> + if (ACPI_FAILURE(status))
> + return false;
Nitpick: A blank line here would slightly aid readability.
> + l3c_pmu->l3c_tag_id = id;
> +
> + /* Get the L3C SCCL ID */
> + if (device_property_read_u32(dev, "hisilicon,scl-id",
> + &l3c_pmu->scl_id)) {
> + dev_err(dev, "Can not read l3c scl-id!\n");
> + return -EINVAL;
> + }
> +
> + /* Get the L3C CPU cluster(CCL) ID */
> + if (device_property_read_u32(dev, "hisilicon,ccl-id",
> + &l3c_pmu->ccl_id)) {
> + dev_err(dev, "Can not read l3c ccl-id!\n");
> + return -EINVAL;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + l3c_pmu->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(l3c_pmu->base)) {
> + dev_err(dev, "ioremap failed for l3c_pmu resource\n");
> + return PTR_ERR(l3c_pmu->base);
> + }
> +
> + return 0;
> +}
> +
> +static struct attribute *hisi_l3c_pmu_format_attr[] = {
> + HISI_PMU_FORMAT_ATTR(event, "config:0-7"),
> + NULL,
> +};
> +
> +static const struct attribute_group hisi_l3c_pmu_format_group = {
> + .name = "format",
> + .attrs = hisi_l3c_pmu_format_attr,
> +};
> +
> +static struct attribute *hisi_l3c_pmu_events_attr[] = {
> + HISI_PMU_EVENT_ATTR(rd_cpipe, 0x00),
> + HISI_PMU_EVENT_ATTR(wr_cpipe, 0x01),
> + HISI_PMU_EVENT_ATTR(rd_hit_cpipe, 0x02),
> + HISI_PMU_EVENT_ATTR(wr_hit_cpipe, 0x03),
> + HISI_PMU_EVENT_ATTR(victim_num, 0x04),
> + HISI_PMU_EVENT_ATTR(rd_spipe, 0x20),
> + HISI_PMU_EVENT_ATTR(wr_spipe, 0x21),
> + HISI_PMU_EVENT_ATTR(rd_hit_spipe, 0x22),
> + HISI_PMU_EVENT_ATTR(wr_hit_spipe, 0x23),
> + HISI_PMU_EVENT_ATTR(back_invalid, 0x29),
> + HISI_PMU_EVENT_ATTR(retry_cpu, 0x40),
> + HISI_PMU_EVENT_ATTR(retry_ring, 0x41),
> + HISI_PMU_EVENT_ATTR(prefetch_drop, 0x42),
> + NULL,
> +};
> +
> +static const struct attribute_group hisi_l3c_pmu_events_group = {
> + .name = "events",
> + .attrs = hisi_l3c_pmu_events_attr,
> +};
> +
> +static struct attribute *hisi_l3c_pmu_attrs[] = {
> + NULL,
> +};
Why have the empty group?
> +
> +static const struct attribute_group hisi_l3c_pmu_attr_group = {
> + .attrs = hisi_l3c_pmu_attrs,
> +};
> +
> +static DEVICE_ATTR(cpumask, 0444, hisi_cpumask_sysfs_show, NULL);
> +
> +static struct attribute *hisi_l3c_pmu_cpumask_attrs[] = {
> + &dev_attr_cpumask.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group hisi_l3c_pmu_cpumask_attr_group = {
> + .attrs = hisi_l3c_pmu_cpumask_attrs,
> +};
> +
> +static const struct attribute_group *hisi_l3c_pmu_attr_groups[] = {
> + &hisi_l3c_pmu_attr_group,
> + &hisi_l3c_pmu_format_group,
> + &hisi_l3c_pmu_events_group,
> + &hisi_l3c_pmu_cpumask_attr_group,
> + NULL,
> +};
> +
> +static const struct hisi_uncore_ops hisi_uncore_l3c_ops = {
> + .write_evtype = hisi_l3c_pmu_write_evtype,
> + .get_event_idx = hisi_uncore_pmu_get_event_idx,
> + .start_counters = hisi_l3c_pmu_start_counters,
> + .stop_counters = hisi_l3c_pmu_stop_counters,
> + .enable_counter = hisi_l3c_pmu_enable_counter,
> + .disable_counter = hisi_l3c_pmu_disable_counter,
> + .enable_counter_int = hisi_l3c_pmu_enable_counter_int,
> + .disable_counter_int = hisi_l3c_pmu_disable_counter_int,
> + .write_counter = hisi_l3c_pmu_write_counter,
> + .read_counter = hisi_l3c_pmu_read_counter,
> +};
> +
> +static int hisi_l3c_pmu_dev_probe(struct platform_device *pdev,
> + struct hisi_pmu *l3c_pmu)
> +{
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + ret = hisi_l3c_pmu_init_data(pdev, l3c_pmu);
> + if (ret)
> + return ret;
> +
> + ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> + &l3c_pmu->node);
> + if (ret) {
> + dev_err(dev, "Error %d registering hotplug", ret);
> + return ret;
> + }
> +
> + ret = hisi_l3c_pmu_init_irq(l3c_pmu, pdev);
> + if (ret)
> + goto fail;
> +
> + l3c_pmu->name = devm_kasprintf(dev, GFP_KERNEL, "hisi_l3c%u_%u",
> + l3c_pmu->l3c_tag_id, l3c_pmu->scl_id);
> + l3c_pmu->num_events = L3C_NR_EVENTS;
> + l3c_pmu->num_counters = L3C_NR_COUNTERS;
> + l3c_pmu->counter_bits = 48;
> + l3c_pmu->ops = &hisi_uncore_l3c_ops;
> + l3c_pmu->dev = dev;
> +
> + return 0;
> +
> +fail:
> + cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> + &l3c_pmu->node);
> + return ret;
> +}
> +
> +static int hisi_l3c_pmu_probe(struct platform_device *pdev)
> +{
> + struct hisi_pmu *l3c_pmu;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + l3c_pmu = hisi_pmu_alloc(dev, L3C_NR_COUNTERS);
> + if (!l3c_pmu)
> + return -ENOMEM;
> +
> + ret = hisi_l3c_pmu_dev_probe(pdev, l3c_pmu);
> + if (ret)
> + return ret;
> +
> + l3c_pmu->pmu = (struct pmu) {
> + .name = l3c_pmu->name,
> + .task_ctx_nr = perf_invalid_context,
> + .event_init = hisi_uncore_pmu_event_init,
> + .pmu_enable = hisi_uncore_pmu_enable,
> + .pmu_disable = hisi_uncore_pmu_disable,
> + .add = hisi_uncore_pmu_add,
> + .del = hisi_uncore_pmu_del,
> + .start = hisi_uncore_pmu_start,
> + .stop = hisi_uncore_pmu_stop,
> + .read = hisi_uncore_pmu_read,
> + .attr_groups = hisi_l3c_pmu_attr_groups,
Obviously not relevant to this patch as you work with what you
have, but this is a structure that looks rather ripe for
splitting into a const ops structure and a data structure
containing the bits that tend to be dynamic (like the name.
Perhaps it's not worth the hassle though.
> + };
> +
> + ret = hisi_uncore_pmu_setup(l3c_pmu, l3c_pmu->name);
As mentioned for patch 2, I'd remove this wrapper. That will make it
clearer that the remove is reversing everything it needs to.
> + if (ret) {
> + dev_err(l3c_pmu->dev, "hisi_uncore_pmu_setup failed!\n");
> + cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> + &l3c_pmu->node);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, l3c_pmu);
> +
> + return 0;
> +}
> +
> +static int hisi_l3c_pmu_remove(struct platform_device *pdev)
> +{
> + struct hisi_pmu *l3c_pmu = platform_get_drvdata(pdev);
> +
> + perf_pmu_unregister(&l3c_pmu->pmu);
> + cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> + &l3c_pmu->node);
The related add_instance call is wrapped up in
hisi_l3c_pmu_dev_probe.
I would suggest wrapping this last call up in a hisi_l3c_pmu_dev_remove
function so that the balance between probe and remove is obvious.
Basic aim of the game is to make the code as easy to review as possible
and this would make it slightly more readable.
> +
> + return 0;
> +}
> +
> +static struct platform_driver hisi_l3c_pmu_driver = {
> + .driver = {
> + .name = "hisi_l3c_pmu",
> + .acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match),
> + },
> + .probe = hisi_l3c_pmu_probe,
> + .remove = hisi_l3c_pmu_remove,
> +};
> +
> +static int __init hisi_l3c_pmu_module_init(void)
> +{
> + int ret;
> +
> + ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> + "AP_PERF_ARM_HISI_L3_ONLINE",
> + hisi_l3c_pmu_online_cpu,
> + hisi_l3c_pmu_offline_cpu);
> + if (ret) {
> + pr_err("l3c_pmu_module_init: Error setup hotplug, ret=%d", ret);
> + return ret;
> + }
> +
> + ret = platform_driver_register(&hisi_l3c_pmu_driver);
> + if (ret)
> + cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE);
> +
> + return ret;
> +}
> +module_init(hisi_l3c_pmu_module_init);
> +
> +static void __exit hisi_l3c_pmu_module_exit(void)
> +{
> + cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE);
> + platform_driver_unregister(&hisi_l3c_pmu_driver);
Would normally expect an exit function to reverse the order of what
goes on in the init function. This is true even if it doesn't
matter as it makes it 'obviously correct' and the reviewer doesn't
have to think about it! So...
platform_driver_unregister(&hisi_l3c_pmu_driver);
cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE);
If not there should be a comment explaining why not.
> +}
> +module_exit(hisi_l3c_pmu_module_exit);
> +
> +MODULE_DESCRIPTION("HiSilicon SoC L3C uncore PMU driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anurup M, Shaokun Zhang");
> diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
> index b56573b..2eab157 100644
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -136,6 +136,7 @@ enum cpuhp_state {
> CPUHP_AP_PERF_S390_SF_ONLINE,
> CPUHP_AP_PERF_ARM_CCI_ONLINE,
> CPUHP_AP_PERF_ARM_CCN_ONLINE,
> + CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
> CPUHP_AP_PERF_ARM_L2X0_ONLINE,
> CPUHP_AP_PERF_ARM_QCOM_L2_ONLINE,
> CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
More information about the linux-arm-kernel
mailing list