[PATCH] memory: Convert to using %pOF instead of full_name
Rob Herring
robh at kernel.org
Tue Jul 18 14:43:14 PDT 2017
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh at kernel.org>
Cc: Nicolas Ferre <nicolas.ferre at microchip.com>
Cc: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Cc: Roger Quadros <rogerq at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-omap at vger.kernel.org
---
drivers/memory/atmel-ebi.c | 17 ++++++++---------
drivers/memory/jz4780-nemc.c | 12 ++++++------
drivers/memory/mvebu-devbus.c | 12 ++++++------
drivers/memory/omap-gpmc.c | 18 +++++++++---------
4 files changed, 29 insertions(+), 30 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 99e644cda4d1..597282e35c69 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
out:
if (ret) {
dev_err(ebid->ebi->dev,
- "missing or invalid timings definition in %s",
- np->full_name);
+ "missing or invalid timings definition in %pOF",
+ np);
return ret;
}
@@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
return -EINVAL;
if ((ret > 0 && !required) || (!ret && required)) {
- dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s",
- np->full_name);
+ dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
+ np);
return -EINVAL;
}
@@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
if (cs >= AT91_MATRIX_EBI_NUM_CS ||
!(ebi->caps->available_cs & BIT(cs))) {
- dev_err(dev, "invalid reg property in %s\n",
- np->full_name);
+ dev_err(dev, "invalid reg property in %pOF\n", np);
return -EINVAL;
}
@@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
}
if (!numcs) {
- dev_err(dev, "invalid reg property in %s\n", np->full_name);
+ dev_err(dev, "invalid reg property in %pOF\n", np);
return -EINVAL;
}
@@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev)
ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
if (ret) {
- dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
- child->full_name);
+ dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
+ child);
ret = atmel_ebi_dev_disable(ebi, child);
if (ret)
diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c
index 919d1925acb9..bcf06adefc96 100644
--- a/drivers/memory/jz4780-nemc.c
+++ b/drivers/memory/jz4780-nemc.c
@@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
bank = of_read_number(prop, 1);
if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) {
dev_err(nemc->dev,
- "%s requests invalid bank %u\n",
- child->full_name, bank);
+ "%pOF requests invalid bank %u\n",
+ child, bank);
/* Will continue the outer loop below. */
referenced = 0;
@@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
}
if (!referenced) {
- dev_err(nemc->dev, "%s has no addresses\n",
- child->full_name);
+ dev_err(nemc->dev, "%pOF has no addresses\n",
+ child);
continue;
} else if (nemc->banks_present & referenced) {
- dev_err(nemc->dev, "%s conflicts with another node\n",
- child->full_name);
+ dev_err(nemc->dev, "%pOF conflicts with another node\n",
+ child);
continue;
}
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 24852812fd44..981860879d02 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus,
err = of_property_read_u32(node, name, &time_ps);
if (err < 0) {
- dev_err(devbus->dev, "%s has no '%s' property\n",
- name, node->full_name);
+ dev_err(devbus->dev, "%pOF has no '%s' property\n",
+ node, name);
return err;
}
@@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
if (err < 0) {
dev_err(devbus->dev,
- "%s has no 'devbus,bus-width' property\n",
- node->full_name);
+ "%pOF has no 'devbus,bus-width' property\n",
+ node);
return err;
}
@@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
&w->sync_enable);
if (err < 0) {
dev_err(devbus->dev,
- "%s has no 'devbus,sync-enable' property\n",
- node->full_name);
+ "%pOF has no 'devbus,sync-enable' property\n",
+ node);
return err;
}
}
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index a80e17de906d..f7f393541934 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -960,7 +960,7 @@ static int gpmc_cs_remap(int cs, u32 base)
* Make sure we ignore any device offsets from the GPMC partition
* allocated for the chip select and that the new base confirms
* to the GPMC 16MB minimum granularity.
- */
+ */
base &= ~(SZ_16M - 1);
gpmc_cs_get_memconf(cs, &old_base, &size);
@@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct omap_onenand_platform_data *gpmc_onenand_data;
if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
+ dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+ child);
return -ENODEV;
}
@@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
struct gpmc_device *gpmc = platform_get_drvdata(pdev);
if (of_property_read_u32(child, "reg", &cs) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
+ dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+ child);
return -ENODEV;
}
if (of_address_to_resource(child, 0, &res) < 0) {
- dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
- child->full_name);
+ dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n",
+ child);
return -ENODEV;
}
@@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
ret = of_property_read_u32(child, "bank-width",
&gpmc_s.device_width);
if (ret < 0) {
- dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
- child->full_name);
+ dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n",
+ child);
goto err;
}
}
--
2.11.0
More information about the linux-arm-kernel
mailing list